메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김찬중 (자동차부품연구원) 배철용 (자동차부품연구원) 신진용 (평화정공) 윤근하 (평화정공) 권성진 (자동차부품연구원) 이봉현 (자동차부품연구원)
저널정보
한국자동차공학회 한국자동차공학회 춘계학술대회 2010 KSAE 부문 종합학술대회
발행연도
2010.5
수록면
1,411 - 1,414 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Slam testing of a door module is one of the most significant fatigue-related testing process to meet the qualified performance guideline that is stipulated by major car makers. And every testing procedure of the slam testing is done as slamming the moving part of a door module by hydraulic actuators in practice. Current testing situation is required considerable efforts on the way to prepare the slam testing and even more, even a single specimen result sacrifices at least two weeks or more physically. In this paper, a accelerated similarity testing methodology of a door module is proposed using vibration test equipment instead of the honest testing procedure, that is purely slamming the target system repeatedly up to a failure mode. The response of a door plate module during slam testing indicates that fundamental resonance behaviors of the specimen accumulates the fatigue damage on hot spot of the door plate module. So, The accelerated similarity alternatives of the slam testing is proposed by the block cycle excitation of which spectrum is consisted of resonance frequencies of a target system. Also, the calibration of block cycle testing is conducted through the comprehend the fact of failure mode obtained by the multi-axial vibration testing.

목차

Abstract
1. 서론
2. 일반 슬램 시험
3. MAST 장비를 활용한 진동내구 시험
3. 단축 가속내구 시험
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-003108367