메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
권준범 (한국과학기술원) 최재영 (LS산전) 허훈 (한국과학기술원)
저널정보
한국자동차공학회 한국자동차공학회 춘계학술대회 2013 KSAE 부문 종합학술대회
발행연도
2013.5
수록면
1,639 - 1,648 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper is concerned with the evaluation and prediction of the effect of the strain rate on the tensile properties of CFRP. Tensile tests of CFRP laminates were conducted at various strain rates ranged from 0.001/s to 100/s to measure varieties of the elastic modulus and ultimate tensile strength depending on strain rate. To enhance the accuracy of the strain measurement, Digital Image Correlation (DIC) method was employed to measure the axial strain of specimens using a highspeed camera and the ARAMIS software program. The tensile properties of the unidirectional CFRP laminates stacked with [0]4, [90]4 and [45]4 have been obtained to predict the elastic modulus of the CFRP with various laminate stacking sequences. The prediction model of the elastic modulus of CFRP laminates is suggested by using the laminate theory and the tensile properties of the unidirectional CFRP laminates. The prediction model was also compared with the static and dynamic tensile test results of the CFRP laminates stacked with [0/90/90/0], [45/-45/-45/45] and [0/45/-45/90].

목차

Abstract
1. 서론
2. 변형률속도에 따른 인장시험 조건 및 일방향 CFRP 복합재료 인장시험
3. 적층 각도를 고려한 탄성계수 예측
4. 결론
References

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-002589331