지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2013.5
- 수록면
- 2,110 - 2,115 (6page)
이용수
초록· 키워드
오류제보하기
Plasticizers as plastic additives increase plasticity and fluidity of a material and give a material improved flexibility and durability. Dominant applications are for plastics, especially PVC (Poly Vinyl Chloride). Plasticizers work by embedding themselves between the chains of polymers. Plasticizers can be migrated to contacted surface and spacing them apart. Therefore, a contacted plastic is softened and cracked and its surface can be changed easily. There are many quality issues suspected plasticizer effects in various automotive applications. So, it is very important to find the right plasticizer and good combination between the contacted materials. DFSS (Design for Six Sigma) tool is used in order to investigate the plasticizer effects on the contacted plastic materials. Several different kinds of plasticizers including DOP (Di Octyl Phthalate) and Bio based plasticizer were contacted on the typical plastic materials (control factor) during the several times (noise factor) at continuous temperature. Contribution of all factors was prioritized by Interaction analysis. Robust assessment for plasticizers against plastic variants and plastic against plasticizer variants were able to propose the Design guideline for preferred material decision of parts so that the parts construction must be compatible with all adjacent materials and must not exhibit migration staining of adjacent parts.
목차
Abstract
1. 서론
2. 시험 및 평가
3. DFSS 분석 및 결과
4. 결론
References
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
가소제의 제조특성 및 용도
원호연
,
김일원
고분자 과학과 기술
1995
.04
친환경 가소제를 첨가한 에틸 셀룰로오스 나노복합체
최성헌
,
조미숙
,
김덕준
외 5명
폴리머
2005
.07
가소제와 가공조제가 PVC 의 유성학적특성 및 물성에 미치는 영향
김광웅
,
홍순만
,
김병철
폴리머
1987
.06
Poly(1,2-propylene glycol adipate) as an Environmentally Friendly Plasticizer for Poly(vinyl chloride)
Yan Zhao
,
Hongyu Liang
,
Dandan Wu
외 7명
폴리머
2015
.03
자동차용 플라스틱 재료 동향
편집부
한국자동차공학회 Workshop
2014
.09
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-002580681