지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2013.6
- 수록면
- 287 - 296 (10page)
이용수
초록· 키워드
오류제보하기
To decompose carbon dioxide, which is a representative greenhouse gas, a plasma torch was designed and manufactured. To examine the characteristics of carbon dioxide decomposition via plasma discharge, a case wherein pure carbon dioxide was supplied and a case wherein methane and/or TiCl₄ were injected as additives were investigated and compared. The carbon dioxide and methane conversion rate, energy decomposition efficiency, produced gas concentration, carbon monoxide and hydrogen selectivity, carbon-black and TiO₂ were also investigated.
The maximum carbon dioxide conversion rate was 28.9% when pure carbon dioxide was supplied; 44.6% when TiCl₄ was injected as am additive; and 100% percent when methane was injected as an additive. Therefore, this could be explained that the methane injection showed the highest carbon dioxide decomposition.
Furthermore, the carbon-black and TiO₂ were compared with each commercial materials through XRD and SEM. It was found that the carbon-black that was produced in this study is similar for commercial materials. It was found that the TiO₂ that was produced in this study is suitable for photocatalyst and pigment because it has mixed anataze and rutile.
The maximum carbon dioxide conversion rate was 28.9% when pure carbon dioxide was supplied; 44.6% when TiCl₄ was injected as am additive; and 100% percent when methane was injected as an additive. Therefore, this could be explained that the methane injection showed the highest carbon dioxide decomposition.
Furthermore, the carbon-black and TiO₂ were compared with each commercial materials through XRD and SEM. It was found that the carbon-black that was produced in this study is similar for commercial materials. It was found that the TiO₂ that was produced in this study is suitable for photocatalyst and pigment because it has mixed anataze and rutile.
목차
Abstract
1. 서론
2. 실험장치 및 방법
3. 결과 및 토의
4. 이산화탄소 재이용 시스템
5. 결론
참고문헌
참고문헌 (14)
참고문헌 신청
1. [학술지(정기간행물)] - Chiu, S. Y. / 2008 / Reduction of CO2 by a high-density culture of Chlorellasp. in a semicontinuous photo bioreactor / Bioresour. Technol 99 : 3389 ~ 3396
2. [학술지(정기간행물)] - Chun, Y. N. / 2008 / Hydrogen- Rich Gas Production from Biogas Reforming Using Plasmatron / Energ. Fuel 22 : 123 ~ 127
3. [학술지(정기간행물)] - Chun, Y.N / 2009 / Hydrogen generation from biogas reforming using a gliding arc plasma-catalyst reformer / Catal. Today 148 : 283 ~ 289
4. [학술지(정기간행물)] - Guo, X.F. / 2010 / Synthesis of Ultrafine Carbon Black by Pyrolysis of Polymers Using a Direct Current Thermal Plasma Process / Plasma Chem. Plasma Process 30 : 75 ~ 90
5. [학술지(정기간행물)] - Hirata, Y. / 2012 / Electrochemical decomposition of CO2 and CO gases using porous yttria-stabilized zirconia cell / Ceram. Int. 38 : 6377 ~ 6387
2. [학술지(정기간행물)] - Chun, Y. N. / 2008 / Hydrogen- Rich Gas Production from Biogas Reforming Using Plasmatron / Energ. Fuel 22 : 123 ~ 127
3. [학술지(정기간행물)] - Chun, Y.N / 2009 / Hydrogen generation from biogas reforming using a gliding arc plasma-catalyst reformer / Catal. Today 148 : 283 ~ 289
4. [학술지(정기간행물)] - Guo, X.F. / 2010 / Synthesis of Ultrafine Carbon Black by Pyrolysis of Polymers Using a Direct Current Thermal Plasma Process / Plasma Chem. Plasma Process 30 : 75 ~ 90
5. [학술지(정기간행물)] - Hirata, Y. / 2012 / Electrochemical decomposition of CO2 and CO gases using porous yttria-stabilized zirconia cell / Ceram. Int. 38 : 6377 ~ 6387
이 논문의 저자 정보
이 논문과 함께 이용한 논문
수동대기채취기를 이용한 잔류성유기오염물질의 농도산정
최성득
한국대기환경학회지(국문)
2013
.04
미끄럼 영역에 있는 나노입자 프랙탈 응집체의 전기이동도 거동 특성
신원규
한국대기환경학회지(국문)
2013
.04
천리안 위성 해양탑재체와 위성탑재 라이다 관측자료를 이용한 황사 에어러솔의 3차원 모니터링
이권호
한국대기환경학회지(국문)
2013
.04
동아시아지역에서 GEOS-Chem에 의한 경계조건이 CMAQ 모사 결과에 미치는 영향에 대한 평가
최대련
,
구윤서
한국대기환경학회지(국문)
2013
.04
내륙습지와 갯벌에서의 주요 온실기체 배출량 특성연구
김득수
,
나운성
한국대기환경학회지(국문)
2013
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-530-003338694