메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
노윤철 (동아대학교) 안대균 (동아대학교) 한승호 (동아대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2013년도 춘계학술대회 논문집
발행연도
2013.5
수록면
262 - 267 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
AFPM(Axial Flux Permanent Magnet)-typed machine for a large-scaled direct-drive generator of offshore wind turbines has been attractive due to its higher torque effect per unit volume and higher power density in comparison with other such as the RFPM(Radial Flux Permanent Magnet)-typed machine. When this machine will be applied to an offshore wind turbine, the stiffness and robustness of the supported structures should be investigated carefully due to its high electro-magnetic forces which cause a significant deformation of main members. This deformation raises an unexpected change of air-gap clearance which can disturb seriously the power production. The light weight design is also at issue for a higher efficiency of the power production. In this study, a topology model of the direct-drive generator for 2.5MW wind turbine using the AFPM-typed machine was proposed, and evaluation of mechanical behaviors was carried out by electro-magnetic mechanical coupling analysis. Results showed that the weigh of the proposed model could be reduced by 20% in comparison with the conventional generator at condition satisfying the requirements of the structural behaviors.

목차

Abstract
1. 서론
2. AFPM 직접구동형 발전기
3.해석방법 및 절차
4. 해석 결과 및 고찰
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-003294557