메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김태우 (성균관대학교) 윤홍식 (성균관대학교) 이동하 (성균관대학교) 박민우 (성균관대학교)
저널정보
한국측량학회 한국측량학회 학술대회자료집 2012 한국측량학회 춘계학술발표회
발행연도
2012.4
수록면
169 - 175 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, a research has been conducted to find out the optimal projection parameter of KTM2012. An Unified rectangular coordinate system based on the Transverse Mercator projection is designed to cover the whole area of the Korean Peninsula as a single coordinate zone and at this time distortion quantities are minimized. In the case of using the central meridian and scale factor defined in the present UTM-K, the Range of scale correction shows about 1,920ppm and mapping distortions are not distributed evenly. Since central meridian lies along UTM 51.85 Zone, which has a central meridian 127.5° East of the Korean Peninsula with a scale factor of 0.9996 applied on the central meridian. With regard to scale correction, UTM produces the smallest scale correction, of -400ppm or 40cm per km on the central meridian and Dok-do, which means the island of isolation in the East Sea, produces the largest scale correction, of 1,520ppm. On the other hand, a newly derived projection with the Range of scale correction which is about 1,540ppm can be obtained when the true origin and central meridian defined in the KTM2012 are maintained, thus distributing the distortions due to the projection evenly.

목차

Abstract
1. 서론
2. 현행 단일원점 평면직각좌표계의 문제점
3. 단일원점 평면직각좌표계의 개선
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-530-003285836