지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2013.8
- 수록면
- 100 - 107 (8page)
이용수
초록· 키워드
오류제보하기
This study aims to improve the heat performance of motor cycle disk due to the number of holes by analyzing 6 kinds of disk models. This disk performance depends on the efficiency at emitting the heat. To raise the efficiency of heat emission, holes with circle or another configuration are made on disks to emit heat fast. The distribution of temperature, heat flux, deformation and stress are analyzed. As the number of holes on disk increases, the performance of heat emission is improved. Equivalent stress is decreased and durability is improved as the number of holes on disk increases. Though the number of holes on disk is increased, the performances of heat emission and durability do not become better. The optimal model can be found by comparing models each other through this analysis result. Through this study result, the configuration of motor cycle disk is designed with optimal heat emission and durability by comparing models.
목차
ABSTRACT
1. 서론
2. 방열 해석 및 연성 해석 결과
3. 결론
REFERENCES
참고문헌 (11)
참고문헌 신청
3. [학술지(정기간행물)] - Kim, C. K / 1998 / Thermal Behavior Analysis of Disc Brake System During Quick Braking / Trans. of KSME(A) 22 (6) : 1106 ~ 1113
4. [학술대회논문] - Kim, D. Y / 2006 / Thermal Stress Analysis of disc brake according to the changes in the shape / Proceedings of the Korean Society of Precision Engineering 2006 : 285 ~ 286
5. [학술대회논문] - Kim, H. H / 2007 / A Sudy on Temperature Distribution of Automotive Disc according to Shape Change / Korea Mechanical Engineering 2007 Proceedings : 127 ~ 132
6. [학술대회논문] - Ryu, M. R / 2006 / A Study on Friction Coefficient and Temperature with Ventilated Disk Hole Number of Motorcycle Disk Bake / The Korean Society of Mechanical Engineers 2006 Proceedings : 57 ~ 62
7. [학술지(정기간행물)] - Choi, Y / 2004 / Thermal Dissipation Performance of the Ventilated Brake Disc having Helical Grooved Vent / Journal of KSPE 21 (3) : 117 ~ 123
4. [학술대회논문] - Kim, D. Y / 2006 / Thermal Stress Analysis of disc brake according to the changes in the shape / Proceedings of the Korean Society of Precision Engineering 2006 : 285 ~ 286
5. [학술대회논문] - Kim, H. H / 2007 / A Sudy on Temperature Distribution of Automotive Disc according to Shape Change / Korea Mechanical Engineering 2007 Proceedings : 127 ~ 132
6. [학술대회논문] - Ryu, M. R / 2006 / A Study on Friction Coefficient and Temperature with Ventilated Disk Hole Number of Motorcycle Disk Bake / The Korean Society of Mechanical Engineers 2006 Proceedings : 57 ~ 62
7. [학술지(정기간행물)] - Choi, Y / 2004 / Thermal Dissipation Performance of the Ventilated Brake Disc having Helical Grooved Vent / Journal of KSPE 21 (3) : 117 ~ 123
이 논문의 저자 정보
이 논문과 함께 이용한 논문
브레이크 디스크 구조 형상별 내구성 해석
한문식
,
조재웅
한국생산제조학회지
2013
.02
디스크 브레이크의 구조 및 열 해석
조재웅
,
한문식
한국생산제조학회지
2010
.04
형상변화에 따른 디스크 브레이크 열응력해석
김대열
,
김경훈
,
최명진
한국정밀공학회 학술발표대회 논문집
2006
.10
주기적인 마찰력을 받는 드럼-브레이크 슈의 동적안정성
류봉조
,
오부진
,
임경빈
외 1명
한국소음진동공학회논문집
2002
.11
열해석을 통한 소형 통신장비의 방열구조 최적설계에 관한 연구
이공희
,
윤의열
,
전희호
외 1명
대한기계학회 춘추학술대회
2013
.12
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-580-002441250