지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2011.3
- 수록면
- 43 - 50 (8page)
- DOI
- 10.14815/kjdm.2011.03.38.1.43
이용수
초록· 키워드
오류제보하기
The purpose of this study was to confirm the compositional differences of some dental Ni-Cr alloys including beryllium component or not, by quantitative analysis and to confirm that the compositional differences had an effect on melting point and castability using castability test and differential scanning calorimetry. Total five Ni-Cr alloys were used in this study. Quantitative analysis was carried out using EPMA (electron probe micro analyzer, JEOL Company, Japan), and melting points were measured using DSC (differential scanning calorimetry, NETZSCH, German) With forementioned methods, we confirmed the effects of beryllium on melting points. For castability evaluation, the polyester mesh patterns were invested in phosphate bonded investment. Each specimen provided a grid with 100 open regular squares. The castability of each alloy was evaluated by summing up the number of those regular squares reappeared perfectly without breaking.
Following results were obtained:
1. The experimental groups that containing beryllium exhibited the lower melting temperatures and the better castability than the experimental groups that beryllium was not included (p<0.05 ).
2. The component changes of molybdenum (Mo), aluminium (Al), etc in the experimental groups that contained beryllium did not have any effects on melting temperatures and castability (p>0.05 ).
3. The difference in micro-elements in the experimental groups, of which beryllium were not included, did not have any effects on melting temperatures and castability (p>0.05 ).
Silicone, manganese, niobium, etc used as substitution elements of the beryllium used for improvement of castability of Ni-Cr alloys were used. But, alloys that contained these elements did not have good castability than the alloys that containing beryllium component. Therefore, the development of alloys that have biocompatibility and improved castability is necessary.
Following results were obtained:
1. The experimental groups that containing beryllium exhibited the lower melting temperatures and the better castability than the experimental groups that beryllium was not included (p<0.05 ).
2. The component changes of molybdenum (Mo), aluminium (Al), etc in the experimental groups that contained beryllium did not have any effects on melting temperatures and castability (p>0.05 ).
3. The difference in micro-elements in the experimental groups, of which beryllium were not included, did not have any effects on melting temperatures and castability (p>0.05 ).
Silicone, manganese, niobium, etc used as substitution elements of the beryllium used for improvement of castability of Ni-Cr alloys were used. But, alloys that contained these elements did not have good castability than the alloys that containing beryllium component. Therefore, the development of alloys that have biocompatibility and improved castability is necessary.
목차
ABSTRACT
서론
재료 및 방법
결과
고찰
결론
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-510-001125195