메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이영옥 (대전보건대학) 이상배 (연세대학교) 김경남 (연세대학교)
저널정보
대한치과재료학회 대한치과재료학회지 치과기재학회지 제37권 제4호
발행연도
2010.12
수록면
333 - 340 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This research was analyzed detail reproduction, consistency, strain in compression, tear strength and compressive strength from six addition silicones(Blu-Mousse, Parkell, U.S.A., BM; ExabiteⅡ, GC Corp., Japan, EX; Futar<sup>ⓡ</sup>D, Kentten Bach, U.S.A., FU; Perfect, Handae chemical, Korea, PF; Regisil<sup>ⓡ</sup>Rigid, Densply Caulk, Germany, RE; Silagum<sup>ⓡ</sup>, DMG, Germany, SI) and one polyther(Ramitec, 3M/ESPE, Germany, RA) interocclusal recording materials according to KS P ISO 4823 for elastomeric impression materials and ASTM D624-91. Results were as follows: For the comparison of detail reproduction, 50 ㎛ detail line were reproduced in all materials. In consistency test, SI was shown the lowest value of 15.7 ㎜ and FU the highest value of 37.4 ㎜ (p<0.05). In strain in compression test, RA was shown the highest value of 1.70% and FU the lowest value of 0.56% (p<0.05). Tear strength of RA had the highest value of 5.14 N /㎜ and that of PF the lowest value of 3.16 N /㎜ (p<0.05). Compressive strength of FU had the highest value of 0.81 ㎫ and that of RE the lowest value of 0.16 ㎫ (p<0.05). According to these results, it was considered that the properties of consistency and strain in compression was necessary to setup a standard for elastomeric interocclusal recording materials. Furthermore, other properties of interocclusal recording materials should be also considered.

목차

ABSTRACT
서론
연구재료 및 방법
연구결과
고찰
결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-510-001091432