현대 모바일 기기에서 진동 모터는 많은 장비에서 필수적인 옵션으로 많은 장비에 장착되어 있다. 하지만 거의 1 개만 장착되어 사용 중이고, 1 개만으로는 다양한 효과를 주기 힘든 한계가 있다. 특히, 빠른 이벤트가 연속적으로 들어올 때, 1 개의 진동모터로는 새로운 진동 이벤트 처리가 불가능한 한계가 존재한다. 예를 들어, 인간은 100~200ms 단위의 (혹은 그 이하) 촉각 이벤트를 구분 하거나 인터액션이 가능하지만, 진동 모터의 주파수/세기에 대한 Switching 반응 time 은 이보다 대개 길다. 따라서, 본 논문에서는 2 개의 진동 모터를 전환적으로 이용하여 빠른 연속적 촉각 피드백을 사용자가 느낄 수 있도록 하고 이를 검증하는 실험을 진행 하였다. 그 결과 진동 모터 1 개를 사용할 때 보다 연속적인 개별 피드백을 좀 더 잘 인지 할 수 있을 뿐 아니라 전체적인 체감효과나 사용자 경험이 개선 되는 것을 확인 하였다.
Modern hand-held devices are often equipped with a single vibration motor to provide simple on-off type of vibro-tactile feedback. There is an inherent limitation with the single vibrator scheme in terms of providing more enriched feedback. For example, when there is a need to generate feedback for fast successive events, the single vibrator scheme often falls short due to its slow switching and response time (> 500ms) to frequency or amplitude change. On the other hand, the temporal resolution for humans in perceiving tactile events is in the order of 100s of milliseconds or even lower. Humans are also capable of generating interactive events at the rate of 100’s of milliseconds. Therefore, in this paper, we propose to use two or more vibrators and switch between/among them to realize fast and clear provision of individually separated tactile event feedback. We carried out a validation experiment and confirmed the projected effects and also observed overall improved user experience as well.