지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.31 No.5
- 발행연도
- 2014.5
- 수록면
- 451 - 457 (7page)
이용수
초록· 키워드
오류제보하기
Surface roughness of mechanical components is an important factor which affects the tribological phenomena. Various surface patterns have been applied to surfaces to improve the tribological characteristics of mechanical components. In this work, the friction reduction effect of micropatterns on silicon was investigated. For this purpose, micro-dimple patterns were fabricated on silicon wafer by DRIE process. In the friction experiments silicone oil was used as lubricant. Also, the lubricant was cleaned to simulate a lubricant depleted condition. In depleted lubricated condition, friction coefficient of micro-pattern specimens was lower than specimens without micro-patterns. It was found that friction reduction effect of micro-pattern could be successfully maintained even after cleaning the lubricant on the surface.
목차
1. 서론
2. 실험 장치 및 시편
3. 실험 결과
4. 결론
REFERENCES
참고문헌 (11)
참고문헌 신청
Baumgart, P. / 1995 / A New Laser Texturing Technique for High Performance Magnetic Disk Drives / Magnetics 31(6):2946~2951
Lee, S. C. / 1998 / A Study on the Surface Damage between Head/Disk Interfaces by using AFM / J. Korean Soc. Precis. Eng. 15(9):167~174
Kim, D. E. / 2003 / Tribological Design Methods for Minimum Surface Damage of HDD Slider / Tribology International 36(4):467~473
Kim, D. / 2002 / Design of Surface Micro-structures for Friction Control in Micro-systems Applications / CIRP Annals-Manufacturing Technology 51(1):495~498
Wakuda, M. / 2003 / Effect of Surface Texturing on Friction Reduction between Ceramic and Steel Materials under Lubricated Sliding Contact / Wear 254(3):356~363
Lee, S. C. / 1998 / A Study on the Surface Damage between Head/Disk Interfaces by using AFM / J. Korean Soc. Precis. Eng. 15(9):167~174
Kim, D. E. / 2003 / Tribological Design Methods for Minimum Surface Damage of HDD Slider / Tribology International 36(4):467~473
Kim, D. / 2002 / Design of Surface Micro-structures for Friction Control in Micro-systems Applications / CIRP Annals-Manufacturing Technology 51(1):495~498
Wakuda, M. / 2003 / Effect of Surface Texturing on Friction Reduction between Ceramic and Steel Materials under Lubricated Sliding Contact / Wear 254(3):356~363
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Micro-scale Laser Surface Texturing의 정밀 레이저패턴 가공기술과 마찰특성평가
채영훈
,
최시근
,
유은지
외 1명
한국트라이볼로지학회 학술대회
2015
.10
딤플을 가진 래비린스 실의 CFD 유동 해석
서정민
,
박준영
,
최범석
외 1명
대한기계학회 춘추학술대회
2011
.05
골프공에서의 딤플의 역할
최진
,
전우평
,
최해천
대한기계학회 춘추학술대회
2005
.11
마이크로 Crosshatch 그루우브 표면패턴의 각도에 따른 미끄럼 마찰특성
채영훈
Journal of the Korean Society for Precision Engineering
2007
.01
실리콘의 특성 이해와 합성피혁 코팅제로서의 적합성
김수홍
,
백두현
한국염색가공학회지
2023
.03
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-550-001454993