메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장호수 (Incheon National Univ) 강은지 (Incheon National Univ) 박동삼 (Incheon National Univ)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조시스템학회지 Vol.23 No.2
발행연도
2014.4
수록면
173 - 177 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, a 20,000Hz ultrasonic horn was designed and fabricated using a finite element analysis. The horn’s resonate frequency was 19,991Hz, and the harmonic response frequency was 20,000Hz. In order to observe the developed horn’s performance, 4,000 pieces of displacement data were obtained using an optical sensor and were analyzed using a fast Fourier transform. Finally, the developed horn’s resonate frequency was found to be 19,992Hz. The effect of the tip area of the developed horn on the weldability of a Cu sheet was experimentally investigated. It was found that the welding strengths of specimens welded using a small tip area were generally higherthan those of specimens welded using a large tip area.

목차

ABSTRACT
1. 서론
2. 초음파 용접용 혼의 해석
3. 용착성 실험
4. 실험결과 및 고찰
5. 결론
References

참고문헌 (8)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-550-001436264