메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박형필 (Korea Institute of Industrial Technology) 차백순 (Korea Institute of Industrial Technology) 이정원 (Korea Institute of Industrial Technology) 고영배 (Korea Institute of Industrial Technology) 김상권 (Korea Institute of Industrial Technology) 정태성 (Inha Technical College) 김동한 (Ajou University) 이병옥 (Ajou University)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조시스템학회지 Vol.23 No.2
발행연도
2014.4
수록면
206 - 212 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Liquid silicone rubber (LSR) has been widely used in automotive, electrical, and medical components. Thus, research on the use of LSR in the injection molding process is required to obtain high-quality and high-performance products. In this study, a mold was fabricated to examine the effects of the process parameters on the molding and mechanical properties of LSR parts. A computer-aided engineering analysis was used to optimize the air vent depth and curing temperature to decrease the flash at the air vents caused by the low viscosity of LSR. Temperature and pressure sensors were mounted in the mold to determine the effects of the process parameters on the temperature and pressure in the cavity. The tensile strength of the LSR parts was also examined in relation to the process parameters.

목차

ABSTRACT
1. 서론
2. LSR 인장시험 금형 설계
3. 공정조건에 따른 온도와 압력 변화
4. 공정조건에 따른 기계적 강도 분석
5. 결론
References

참고문헌 (9)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-550-001436315