메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김정수 (부산대학교) 박노길 (부산대학교) 한기봉 (중원대학교) 이형우 (중원대학교)
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제28권 제4호
발행연도
2014.8
수록면
314 - 323 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, a gearbox and blade were modeled in the MASTA program, and the housing and carrier components were modeled using a finite element method. Using substructure synthesis, all the components were combined and used to establish a vibration model of a 2.5-MW wind turbine gearbox. In addition, the safety displacement factor was evaluated using an AGMA data sheet about bearing’s outer race for the input shaft and output shaft. As a result, the bearing’s outer race for the input shaft, and the radial and axial responses were satisfied by the 1<SUP>st</SUP> and 2<SUP>nd</SUP> planetary gears and the 3<SUP>nd</SUP> helical gear transmission error(TE), respectively. However, theoutput shaft support bearing’s outer race responses were not satisfied with the radial response by the 2<SUP>nd</SUP> TE and axial response by the 3<SUP>rd</SUP> TE. To reduce the vibration, tooth modification was needed. After profile tooth modification, at the outer race of the output shaft support bearing, the radial response was reduced by approximately 20μm, and the axial response was reduced by approximately 6μm.

목차

ABSTRACT
1. 서론
2. 풍력발전용 기어박스 진동 모델링
3. 응답 해석
4. 결론
References

참고문헌 (16)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-550-002606064