메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제63권 제9호
발행연도
2014.9
수록면
1,233 - 1,238 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In this thesis, it is investigated the characteristics of Dye Sensitized Solar Cell (DSSC) according to variation of TiO2 thickness (6, 12, 18, and 24 ㎛) and three distinct TiO₂ sintering temperatures (350, 450 and 550℃) by XRD, SEM, I-V and UV-Vis spectrophotometer. According to sintering temperature, TiO₂ was transformed into the anatase structure at 350℃, rutile structure at 550℃ and further into the two structure at 450℃. With increasing thickness up to 18 ㎛ and sintering temperature up to 450℃, respectively, the irradiance rate increased in the range of 9 ∼26 percent and 2.80∼5.10 percent. Whereas a further increase to 24 ㎛ and 550℃, the irradiance rate decrease in the range of 4∼11 percent and 30∼47 percent. The conversion efficiency increased in the range of 2.80∼5.01 and 3.03∼5.01 with increasing thickness up to 18㎛ and sintering temperature up to 450℃. By contrast, increase to 24 ㎛ and 550℃, the conversion efficiency decreased in the range of 3.31∼5.01 and 2.80∼3.89, respectively. The DSSC that thickness of TiO₂ were 18 ㎛ and sintered at 450℃ exhibited the most excellent characteristics, in which open-circuit voltage, short-circuit current, Fill Factor and conversion efficiency are 0.69 V, 11.4 ㎃/㎠, 0.64 and 5.01%, respectively.

목차

Abstract
1. 서론
2. 실험 방법
3. 측정 및 분석
4. 실험결과 및 고찰
5. 결론
References

참고문헌 (5)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-500-002602162