지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
A quantitative understanding on the effect of the welding conditions on weld joint dimensions and weld thermal cycle is difficult through experimental studies alone. The experimental realization of temperature distribution in the weld pool is proved to be extremely difficult due to the small size of welds, high peak temperature and steep temperature gradients in weld pool. This review deals with the heat transfer and fluid flow analysis to understand the parametric influence of a single wire submerged arc welding (SAW) and multi-wire SAW processes on the weld bead dimensions, temperature and fluid flow distribution in the weldment.
목차
Abstract
1. Introduction
2. Theoretical modeling
3. Conclusions
References
참고문헌 (19)
참고문헌 신청
1. [학술지(정기간행물)] - S. A. David / 1992 / Current issues and problems in welding science / Science 257 (5096) : 497 ~ 502
2. [학술지(정기간행물)] - A. K. Pathak / 2004 / Three-dimensional finite element analysis to predict the different zones of microstructure in submerged arc welding / proceedings of the institution of mechanical engineers 218 (3) : 269 ~ 280
3. [학술지(정기간행물)] - M. M. Mahapatra / 2006 / Three-dimensional finite element analysis to predict the effects of SAW process parameters on temperature distribution and angular distortion in single-pass butt joints with top and bottom reinforcements / International journal of pressure vessels and piping 83 (7) : 721 ~ 729
4. [학술지(정기간행물)] - P. Biswas / 2010 / Numerical and experimental study on prediction of thermal history and residual deformation of doublesided fillet welding / Proceedings of the Institution of Mechanical Engineers: Part B Journal of Engineering Manufacture 224 (1) : 125 ~ 134
5. [학술지(정기간행물)] - J. Goldak / 1984 / A new finite element model for welding heat source / Metallurgical Transactions B 15 (2) : 299 ~ 305
2. [학술지(정기간행물)] - A. K. Pathak / 2004 / Three-dimensional finite element analysis to predict the different zones of microstructure in submerged arc welding / proceedings of the institution of mechanical engineers 218 (3) : 269 ~ 280
3. [학술지(정기간행물)] - M. M. Mahapatra / 2006 / Three-dimensional finite element analysis to predict the effects of SAW process parameters on temperature distribution and angular distortion in single-pass butt joints with top and bottom reinforcements / International journal of pressure vessels and piping 83 (7) : 721 ~ 729
4. [학술지(정기간행물)] - P. Biswas / 2010 / Numerical and experimental study on prediction of thermal history and residual deformation of doublesided fillet welding / Proceedings of the Institution of Mechanical Engineers: Part B Journal of Engineering Manufacture 224 (1) : 125 ~ 134
5. [학술지(정기간행물)] - J. Goldak / 1984 / A new finite element model for welding heat source / Metallurgical Transactions B 15 (2) : 299 ~ 305
이 논문의 저자 정보
이 논문과 함께 이용한 논문
차체용 1.2GPa급 초고장력 TRIP강의 Weldbond 접합부의 기계적 거동
이종대
,
이소정
,
방정환
외 4명
대한용접·접합학회지
2014
.10
耐Sour 라인파이프 강재의 개발동향 및 용접부 Sour특성
김영훈
,
송우현
,
고성웅
대한용접·접합학회지
2014
.10
API X-100의 레이저-아크 하이브리드 용접성에 미치는 용접와이어의 영향
김성욱
,
이목영
대한용접·접합학회지
2014
.10
발전설비 보일러 튜브 용접부의 잔여수명평가 신뢰성 향상을 위한 기계적 물성 변화 연구(SA213-T12)
오병진
,
장중순
대한용접·접합학회지
2014
.06
AISI 304 스테인리스 강으로 제작된 LNG배관 용접부의 극저온 샤르피 충격시험
김정현
,
최성웅
,
박두환
외 1명
대한용접·접합학회지
2014
.06
최근 본 자료
댓글(0)
0