메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장향인 (인하대학교) 최원기 (비이엘테크놀로지) 최경석 (한국건설기술연구원) 엄재용 (인하대학교) 이현수 (인하대학교) 서승직 (인하대학교)
저널정보
한국건축친환경설비학회 한국건축친환경설비학회 논문집 한국건축친환경설비학회 논문집 제8권 제1호
발행연도
2014.2
수록면
14 - 20 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Windows of the buildings will be installed in a variety of sizes and shapes, but 2m × 2m sized windows(specimen) are evaluating U value by the KS F 2278, so there is a difference between windows that are applied to the actual building and specimen. In this paper, it is evaluated on U value by the effects of changes in size of windows, correlation was derived. The following conclusions were derived.
1) Depending on the type of spacer average U value difference is approximately 0.06 W/㎡·K.
2) 0.005 W/m·K increase in linear U value, U value is increased approximately 0.0094 W/㎡·K.
3) In the same conditions of the frame, as excellent U value of glazing, U value of windows bigger changes according to the window size changes.
Later, the U value change analysis according to the size will be performed for various types of windows in order to provide a reasonable calculation criteria, so additional studies should be performed.

목차

Abstract
1. 서론
2. 창호의 열관류율 계산 방법
3. 분석 범위 및 대상 모델
4. 결과 및 고찰
5. 결론
참고문헌

참고문헌 (8)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-540-002814113