메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이용욱 (부경대학교)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제29권 제4호
발행연도
2015.4
수록면
11 - 17 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
While most switching devices are based on PN junctions, a single layer can realize a switching device in the case of vanadium dioxide(VO<SUB>2</SUB>) thin films. In this paper, bidirectional current triggering(switching) is demonstrated in a two-terminal planar device based on a VO<SUB>2</SUB> thin film by illuminating the film with an infrared laser at 1550nm. To begin with, a two-terminal planar device, which had a 30μm-wide VO<SUB>2</SUB> conducting layer and an electrode separation of 10μm, was fabricated. A specific bias voltage range for stable bidirectional laser triggering was experimentally obtained by measuring the current-voltage characteristics of the fabricated device in a current-controlled mode. Then, by constructing a test circuit composed of the device, a standard resistor, and a DC voltage source, connected in series, the transient response of laser-triggered current and its response time were investigated with a DC bias voltage, included in the above specific bias voltage range, applied to the device. In the test circuit with a DC voltage source of 3.35V and a 10Ω resistor, bidirectional laser triggering could be realized with a maximum on-state current of 15mA and a switching contrast of ∼78.95.

목차

Abstract
1. 서론
2. 소자 제작 및 광 트리거링 셋업
3. 실험 결과 및 논의
4. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-565-001356424