지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2015.10
- 수록면
- 1,593 - 1,597 (5page)
이용수
초록· 키워드
오류제보하기
Vibration attenuation is necessary in many electro-mechanical systems. In this paper electromagnetic damping is applied on a flexible cantilever beam (FCB) made of ferromagnetic material. The lateral vibration is controlled by employing two electromagnetic poles mounted in the same axis as that of a vibrating cantilever beam. A power amplifier is developed to provide desired current to the electromagnet. Comparison of damping achieved at different electromagnetic forces is presented. The study employs a new method of applying a constant DC power to one of the electromagnets while other is connected to a variable current source. Experimental results are presented that show the effectiveness of the presented approach.
목차
Abstract
1. INTRODUCTION
2. MODELING OF CANTILEVER BEAM
3. EXPERIMENTAL SETUP
4. RESULTS AND ANALYSIS
5. CONCLUSION
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Computer Imaging of Electromagnetic Environment in Air Space with Industrial Electromagnetic Field Sources in Conditions of Combined Influence of EM Radiation
Journal of Electromagnetic Engineering And Science
2022 .01
-
A measuring system for determination of a cantilever beam support moment
Smart structures and systems
2017 .01
-
Structural Damping Effects on Stability of a Cantilever Column under Sub-tangentially Follower Force
한국소음진동공학회 학술대회논문집
2016 .04
-
Estimation of Nonlinear Kinematic Hardening Model Parameter for Modeling Nonlinear Dynamic Property of Rock
대한토목학회 학술대회
2020 .10
-
A measuring system for determination of a cantilever beam support moment
Smart Structures and Systems, An International Journal
2017 .01
-
Complex modes in damped sandwich beams using beam and elasticity theories
Advances in aircraft and spacecraft science
2015 .01
-
A Modal Test of a Cantilever Beam Using Wireless Sensor Nodes
Proceedings of The International Workshop on Future Technology
2017 .05
-
Vibration reduction of a pipe conveying fluid using the semi-active electromagnetic damper
Coupled systems mechanics
2017 .01
-
측정 오류를 고려한 보 굽힘의 불확실성 모델링
대한기계학회 춘추학술대회
2018 .04
-
The effect of internal axial forces of a cantilever beam with a lumped mass at its free end
Coupled systems mechanics
2018 .01
-
액적 충돌에 의해 바닥과 접촉하는 외팔보의 역학
대한기계학회 춘추학술대회
2021 .11
-
Cantilever beam vibration sensor based on the axial property of fiber Bragg grating
Smart Structures and Systems, An International Journal
2017 .01
-
The influence of nonlinear damping on the response of a piezoelectric cantilever sensor in a symmetric or asymmetric configuration
Smart Structures and Systems, An International Journal
2022 .09
-
Cantilever beam vibration sensor based on the axial property of fiber Bragg grating
Smart structures and systems
2017 .01
-
Seismic analysis of bridges based on stress-dependent damping
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
캔틸레버형 모듈을 이용한 광대역 압전 하베스터 개발 및 평가
센서학회지
2020 .01
-
전자기 유도를 활용한 전자기 댐퍼의 구조 설계에 관한 연구
조명·전기설비학회논문지
2022 .10
-
Improvement of Shielding for Electromagnetic Compatibility
IEIE Transactions on Smart Processing & Computing
2016 .02
-
Vibration and damping behaviors of symmetric layered functional graded sandwich beams
Structural engineering and mechanics : An international journal
2017 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-569-001919563