메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김도빈 (부경대학교) 김준하 (부경대학교) 김종수 (부경대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2015년도 동계학술발표대회 논문집
발행연도
2015.11
수록면
180 - 184 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Waste water heat recovery heat pump system uses heat of waste water from public bath or factory as heat pump"s heat source. This system uses a bare tube evaporator. Most Thermal resistance is caused by fouling which occur in outer surface of evaporator. Formed fouling increases directly thermal resistance between waste water and refrigerant so this decreases heat pump"s efficiency. In this study, we fabricate fouling mitigating device in recovery heat exchanger using fluidized bubble with sponge ball. Experimental condition is as follow : cold water temperature is 20℃, waste water temperature is 40℃, cold water flow rate is 100kg/h and heat exchanger surface area is 0.161m2. As a result, thermal resistance by formed fouling used fluidized bubble and sponge ball was lower than if not. When the number of sponge balls was higher, thermal resistance was lower. However, when the number of sponge ball was higher than 300, amplitude of thermal resistance decrease was lower.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-553-002132597