메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김정훈 (한국기계전기전자시험연구원) 임계훈 (한국기계전기전자시험연구원) 김승현 (한국기계전기전자시험연구원) 진철규 (한국기계전기전자시험연구원) 박재홍 (엘에치이 기술연구소) 조성열 (엘에치이 기술연구소) 홍인기 (엘에치이 기술연구소) 이상래 (이노윌)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2015년도 동계학술발표대회 논문집
발행연도
2015.11
수록면
362 - 366 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In the various plants such as power plant and petro-chemical plant and industrial facilities such as unit factory, the demand of heating and hot-water supply system using steam are more and more increasing. Compact steam unit is one of good solution in terms of energy reuse as system for making hot water and hot-water supply water using closed-loop system. It was intended to understand the characteristics of heat transfer and pressure drop using hybrid heat exchanger to apply high pressure compact steam unit(CSU) for industrial plants and unit factory by experimental methods. The experimental results are the followings. Heat balance between hot side and cold side was within ± 5 %. j factor was increased linearly as the Reynolds number was increased. And, Overall heat transfer coefficient exceeded 4,750 kcal/㎡h℃ when the flow velocity was 0.5 m/s above on both first test(narrow gap side) and second test(wide gap side). And, f factor was decreased as the Reynolds number was increased. Finally, pressure drop per unit length was below 0.5 bar/m on both first test(narrow gap side) and second test(wide gap side).

목차

Abstract
1. 서론
2. 실험 장치 및 방법
3. 실험 결과 및 고찰
4. 결론
5. 향후 계획
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-553-002133069