메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
장용래 (한양대학교) 정완호 (한양대학교) 김학성 (한양대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
563 - 566 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Recently, printed electrodes in conductive thin film using flash light sintering are widely used for electronic device (e.g. solar cells, touch screens, OLED and FPCB). To fabricate the electronic device, the metal nanoink was used and the flash light sintering process should be required. In this paper, for productivity improvement of electronic device via flash light sintering process, the reflector for irradiation of large area was designed. Therefore, to cover large area and have uniform light density, the shape parameters of reflector were controlled. The shape of reflector was coded by ‘MATLAB’ program and optimized with ‘PIAnO’ program. In order to simulate the optical mechanism, ‘APEX’ was used to investigate the light paths, intensity, and uniformity for optimized reflector. Finally, using new designed reflector, the flash light can be irradiated with large area of length (10 ㎝) and width (15 ㎝) (lamp size: length (10 ㎝) and width (1㎝)) and uniform light density.

목차

Abstract
1. 서론
2. 설계 방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002189622