지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2015.11
- 수록면
- 1,849 - 1,852 (4page)
이용수
이 논문의 연구 히스토리 (4)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Alloy 617 is a major candidate material for use of the intermediate heat exchanger (IHX) of a very high temperature reactor (VHTR) system, which is designed to be used for a 60 year lifetime at a high temperature. Creep crack growth (CCG) behavior as well as creep deformation, due to creep damage during the long service life at elevated temperatures, is very important. However, the CCG design data to meet the needs of the conceptual designers and/or to develop ASME design code of VHTR system are not available elsewhere. In this study, a series of experimental CCG data was obtained from the CCG tests performed under different applied loads at 800 and 850oC for Alloy 617. The CCG behavior was evaluated in terms of the C<SUP>*</SUP> fracture parameter, and the CCG laws for the two temperatures were proposed and fracture microstructures were observed and discussed.
목차
Abstract
1. Introduction
2. Experimental methods
3. Results and discussion
4. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Thermal Aging Effects on Creep Rupture Behavior of Alloy 617
대한기계학회 춘추학술대회
2017 .11
-
몬테칼로 시물레이션에 의한 Alloy 800H의 크리프균열성장속도의 신뢰성 해석
대한기계학회 춘추학술대회
2019 .02
-
초고온가스로용 Alloy 617 의 고온 크리프 파단 거동Very High Temperature Reactor
대한기계학회 춘추학술대회
2016 .04
-
Creep Failure and Damage Mechanism of Inconel 718 Alloy at 800–900 °C
Metals and Materials International
2021 .01
-
Comparison of Creep Fracture Behavior Between Selective Laser Melted and Forged Alloy 230 After Testing at 1200 °C
Metals and Materials International
2023 .05
-
Study on Creep Fracture Behavior of Modified SUS304H Steel at 700℃ by Using Small Punch Creep Testing
한국에너지학회 학술발표회
2016 .10
-
Creep and Creep Crack Growth Behaviors of Type 316L Stainless Steel
대한기계학회 춘추학술대회
2020 .07
-
Investigating creep behavior of Ni–Cr–W alloy pressurized tube at 950 °C by using in-situ creep testing system
Nuclear Engineering and Technology
2020 .01
-
Alloy 690 증기발생기 전열관 재료의 크리프 거동 평가
한국압력기기공학회 논문집
2019 .12
-
Effect of Rare Earth Er on Microstructure and Creep Behavior of Al–7Si–0.3Mg Alloy
Metals and Materials International
2021 .01
-
Creep and creep crack growth behaviors for base, weld, and heat affected zone in a grade 91 weldment
Nuclear Engineering and Technology
2021 .02
-
Crack growth and cracking behavior of Alloy 600/182 and Alloy 690/152 welds in simulated PWR primary water
Nuclear Engineering and Technology
2019 .01
-
Probabilistic Evaluation of Creep Crack Growth for Alloy 800H at 800°C
대한기계학회 춘추학술대회
2018 .12
-
Creep strain modeling for alloy 690 SG tube material based on modifi ed theta projection method
Nuclear Engineering and Technology
2022 .05
-
Short-time creep, fatigue and mechanical properties of 42CrMo4 - Low alloy structural steel
Steel and Composite Structures, An International Journal
2016 .01
-
Effect of Temperature and Stress on Creep Behavior of Ultrafine Grained Nanocrystalline Ni-3 at% Zr Alloy
Metals and Materials International
2017 .01
-
초고온가스로용 Alloy 617의 크리프 균열성장속도 확률적 평가
대한기계학회 춘추학술대회
2015 .02
-
A practical power law creep modeling of alloy 690 SG tube materials
Nuclear Engineering and Technology
2021 .09
-
Creep Behavior of Diffusion-Welded High-Temperature Alloy at 800℃
대한용접학회 특별강연 및 학술발표대회 개요집
2021 .05
-
고온 900℃에서 Alloy 617의 크리프-피로 거동
대한기계학회 춘추학술대회
2017 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-550-002184647