메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
윤효준 (POSTECH) 하상렬 (Samsung Electro-Mechanics Co., Ltd.) 이용석 (KAIST) 성우석 (POSTECH) 박창수 (POSCO) 김기태 (POSCO)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
2,300 - 2,303 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Oriented silicon steel sheets having (110)[001] goss texture, are usually produced by cold rolling processes at a rolling reduction above 80%, which can develop surface crack and failure and eventually cause yield drop. Thus, it is essential to characterize a deformation behavior of silicon steels under various forming conditions. In this study, tensile tests were carried out at a strain rate 0.00038/s and in temperature range from room temperature to 300℃. A digital image correlation(DIC) method combined with the miniaturized tensile stage was used to characterize deformation field of the single crystal specimen. The initial and final crystallographic orientations of the tensile specimen were measured in a field-emission microscopy(FE-SEM) by using electron backscatter diffraction(EBSD). A strong dependency of the strain-rate and temperature on the stress-strain curves was observed as a typical characteristic of the body-centeredcubic(BCC) metals. Also, it is shown that even small misalignment of the crystallographic orientation can cause significant change of the stress level by changing the activation of slip system during plastic deformation.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002183231