메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Hoang Van Tho (University of Ulsan) Young Jin Yum (University of Ulsan)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
2,537 - 2,542 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Carbon fillers like multiwalled carbon nanotubes (MWCNT or CNT) and graphene oxide (GO) etc. have superlative mechanical and physical properties. They are widely applied in composite materials with high potential to increase mechanical properties of matrix. The dispersion of nano fillers is the key to evaluate bonding properties of Unsaturated Polyester Resin (UPR). Tensile specimens were fabricated by cast molding with the difference types of nano carbon fillers dispersed by stirring and sonication technique. 0.1 wt.% of MWCNT or GO separately and both of them were mixed with UPR. As the result, Young’s modulus increased significantly due to the appearance of nano fillers in all cases. On the other hand, the mixture of CNT and UPR showed the highest tensile strength and fracture strain. However, the mixture of GO with UPR showed no good effect on ultimate strength and GO combined with CNT also showed the same behavior. Moreover, higher of nano filler ratio, smaller fracture strain of mixture was shown. Scanning electron microscope (SEM) was used as the evidence to evaluate the strength effect of nano particles at the fracture surface of specimens based on their dispersion in UPR.

목차

Abstract
1. Introduction
2. Experimental
3. Results and discussions
4. Conclusions
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002183377