지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.12
- 수록면
- 82 - 88 (7page)
이용수
초록· 키워드
오류제보하기
Purpose: To evaluate the effect of light-curing on the immediate and delayed micro-shear bond strength (μSBS) between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramics and RelyX Ultimate when using Single Bond Universal (SBU).
Materials and Methods: Y-TZP ceramic specimens were ground with #600-grit SiC paper. SBU was applied and RelyX Ultimate was mixed and placed on the Y-TZP surface. The specimens were divided into three groups depending on whether light curing was done after adhesive (SBU) and resin cement application: uncured after adhesive and uncured after resin cement application (UU); uncured after adhesive, but light cured after resin cement (UC); and light cured after adhesive and light cured resin cement (CC). The three groups were further divided depending on the timing of µSBS testing: immediate at 24 hours (UUI, UCI, CCI) and delayed at 4 weeks (UUD, UCD, CCD). μSBS was statistically analyzed using one-way ANOVA and Student-Newman-Keuls multiple comparison test (P<0.05). The surface of the fractured Y-TZP specimens was analyzed under a scanning electron microscope (SEM).
Result: At 24 hours, µSBS of UUI group (8.60±2.06 MPa) was significantly lower than UCI group (25.71±4.48 MPa) and CCI group (29.54±3.62 MPa) (P<0.05). There was not any significant difference between UCI and CCI group (P>0.05). At 4 weeks, µSBS of UUD group (24.43±2.88 MPa) had significantly increased over time compared to UUI group (P<0.05). The SEM results showed mixed failure in UCI and CCI group, while UUI group showed adhesive failure.
Conclusion: Light-curing of universal adhesive before or after application of RelyX Ultimate resin cement significantly improved the immediate μSBS of resin cement to air-abrasion treated Y-TZP surface. After 4 weeks, the delayed μSBS of the non-light curing group significantly improved to the level of light-cured groups.
Materials and Methods: Y-TZP ceramic specimens were ground with #600-grit SiC paper. SBU was applied and RelyX Ultimate was mixed and placed on the Y-TZP surface. The specimens were divided into three groups depending on whether light curing was done after adhesive (SBU) and resin cement application: uncured after adhesive and uncured after resin cement application (UU); uncured after adhesive, but light cured after resin cement (UC); and light cured after adhesive and light cured resin cement (CC). The three groups were further divided depending on the timing of µSBS testing: immediate at 24 hours (UUI, UCI, CCI) and delayed at 4 weeks (UUD, UCD, CCD). μSBS was statistically analyzed using one-way ANOVA and Student-Newman-Keuls multiple comparison test (P<0.05). The surface of the fractured Y-TZP specimens was analyzed under a scanning electron microscope (SEM).
Result: At 24 hours, µSBS of UUI group (8.60±2.06 MPa) was significantly lower than UCI group (25.71±4.48 MPa) and CCI group (29.54±3.62 MPa) (P<0.05). There was not any significant difference between UCI and CCI group (P>0.05). At 4 weeks, µSBS of UUD group (24.43±2.88 MPa) had significantly increased over time compared to UUI group (P<0.05). The SEM results showed mixed failure in UCI and CCI group, while UUI group showed adhesive failure.
Conclusion: Light-curing of universal adhesive before or after application of RelyX Ultimate resin cement significantly improved the immediate μSBS of resin cement to air-abrasion treated Y-TZP surface. After 4 weeks, the delayed μSBS of the non-light curing group significantly improved to the level of light-cured groups.
목차
Introduction
Materials and Methods
Result
Discussion
Conclusion
References
참고문헌 (23)
참고문헌 신청
[학술지(정기간행물)] - Piconi C / 1999 / Zirconia as a ceramic biomaterial / Biomaterials 20 : 1 ~ 25
[학술지(정기간행물)] - Chaiyabutr Y / 2008 / The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic / J Prosthet Dent 100 : 194 ~ 202
[학술지(정기간행물)] - Cavalcanti AN / 2009 / Bond strength of resin cements to a zirconia ceramic with different surface treatments / Oper Dent 34 : 280 ~ 287
[학술지(정기간행물)] - Magne P / 2010 / New zirconia primer improves bond strength of resinbased cements / Dent Mater 26 : 345 ~ 352
[학술지(정기간행물)] - Kitayama S / 2010 / Internal coating of zirconia restoration with silica-based ceramic improves bonding of resin cement to dental zirconia ceramic / Biomed Mater Eng 20 : 77 ~ 87
[학술지(정기간행물)] - Chaiyabutr Y / 2008 / The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic / J Prosthet Dent 100 : 194 ~ 202
[학술지(정기간행물)] - Cavalcanti AN / 2009 / Bond strength of resin cements to a zirconia ceramic with different surface treatments / Oper Dent 34 : 280 ~ 287
[학술지(정기간행물)] - Magne P / 2010 / New zirconia primer improves bond strength of resinbased cements / Dent Mater 26 : 345 ~ 352
[학술지(정기간행물)] - Kitayama S / 2010 / Internal coating of zirconia restoration with silica-based ceramic improves bonding of resin cement to dental zirconia ceramic / Biomed Mater Eng 20 : 77 ~ 87
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Shear bond strength of zirconia to resin: The effects of specimen preparation and loading procedure
The Journal of Advanced of Prosthodontics
2019 .01
-
Effect of universal adhesive pretreatments on the bond strength durability of conventional and adhesive resin cements to zirconia ceramic
The Journal of Advanced of Prosthodontics
2024 .04
-
Effect of hydrofluoric acid-based etchant at an elevated temperature on the bond strength and surface topography of Y-TZP ceramics
Restorative Dentistry and Endodontics
2020 .01
-
Simple methods to enhance bond strength of self-adhesive resin cements
Restorative Dentistry and Endodontics
2015 .01
-
Influence of nano-structured alumina coating on shear bond strength between Y-TZP ceramic and various dual-cured resin cements
The Journal of Advanced of Prosthodontics
2017 .01
-
Effect of dentin pretreatment and curing mode on the microtensile bond strength of self-adhesive resin cements
The Journal of Advanced of Prosthodontics
2015 .01
-
Effect of adhesive application method on repair bond strength of composite
Restorative Dentistry and Endodontics
2021 .08
-
Shear bond strength between universal adhesives with various pH and dual-cured resin cements
대한치과재료학회지
2018 .12
-
Microhardness of resin cements after light activation through various translucencies of monolithic zirconia
The Journal of Advanced of Prosthodontics
2021 .08
-
레진시멘트의 종류와 특성
대한치과의사협회지
2015 .03
-
Evaluation of shear bond strength between dual cure resin cement and zirconia ceramic after thermocycling treatment
The Journal of Advanced of Prosthodontics
2015 .01
-
Influence of irradiation distance on the mechanical performances of resin composites polymerized with high-irradiance light curing units
생체재료학회지
2022 .06
-
A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength
Restorative Dentistry and Endodontics
2015 .01
-
Effect of atmospheric plasma versus conventional surface treatments on the adhesion capability between self-adhesive resin cement and titanium surface
The Journal of Advanced of Prosthodontics
2015 .01
-
The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cements
The Journal of Advanced of Prosthodontics
2020 .01
-
중합방법에 따른 여러 이중중합 레진 시멘트의 기계적 성질 평가
구강회복응용과학지
2015 .03
-
Effect of Accelerated Aging on the Color Stability of Dual-Cured Self-Adhesive Resin Cements
Journal of Korean Dental Science
2015 .12
-
Effect of the Surface Treatment by Airborne-particle Abrasion on the Shear Bond Strength of Resin Cement to Hybrid Ceramic
대한통합치과학회지
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-515-002234312