지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.3
- 수록면
- 78 - 82 (5page)
이용수
초록· 키워드
오류제보하기
Cogging torque will affect the performance of a permanent magnet Brushless DC Motor (BLDCM), thus the reduction of cogging torque is key for BLDCM optimization. In this paper, the phase shifting of cogging torque for a fractional-slot concentrated winding BLDCM is analyzed using the Maxwell tensor method. Moreover, a 9-slot 10-pole concentrated winding BLDCM driven by ideal square waveform is studied with the finite element method (FEM). An effective method to reduce the cogging torque is obtained by adjusting the slot opening. In addition, the influences of different slot openings on back electromotive force (back-EMF), air gap flux density and flux linkage are investigated and experimentally validated using the prototype BLDCM.
목차
1. Introduction
2. Analytical Method of Cogging Torque
3. Finite Element Analysis
4. Experiment
5. Conclusion
References
참고문헌 (12)
참고문헌 신청
T. W. Kim and J. H. Chang, J. Magn. 17, 2 (2012).
Y. U. Park, J. H. Cho, S. H. Rhyu, and D. K. Kim, J. Magn. 18, 2 (2013).
W. Q. Chu and Z. Q. Zhu, IEEE Trans. Magn. 49, 6 (2013).
W. Fei and P. Luk. IEEE Trans. Ind. Appl. 46, 4 (2010).
Z. Q. Zhu, S. Ruangsinchaiwanich, and D. Howe, IEEE Trans. Ind. Appl. 42, 3 (2006).
Y. U. Park, J. H. Cho, S. H. Rhyu, and D. K. Kim, J. Magn. 18, 2 (2013).
W. Q. Chu and Z. Q. Zhu, IEEE Trans. Magn. 49, 6 (2013).
W. Fei and P. Luk. IEEE Trans. Ind. Appl. 46, 4 (2010).
Z. Q. Zhu, S. Ruangsinchaiwanich, and D. Howe, IEEE Trans. Ind. Appl. 42, 3 (2006).
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Cogging Torque Reduction in Permanent-Magnet Brushless Generators for Small Wind Turbines
Journal of Magnetics
2015 .06
-
Investigation of Torque Ripple in an Induction Motor with Respect to Slot Number Combinations
Journal of Magnetics
2022 .03
-
Magnetic Field and Cogging Torque Analysis of Surface Permanent Magnet Synchronous Machine using Analytical Method
Journal of Magnetics
2020 .12
-
A study on reducing cogging torque and torque ripple by changing the shape of large ship motor
한국자기학회 학술연구발표회 논문개요집
2024 .05
-
Tooth Shape Design of Permanent Magnet Motor for Cogging Torque Reduction
한국자기학회 학술연구발표회 논문개요집
2016 .11
-
Random Optimization Method to Reduce Cogging Torque of Interior Permanent Magnet Synchronous Motor
Journal of Magnetics
2019 .12
-
Analytical Modelling of Open-Circuit Flux Linkage, Cogging Torque and Electromagnetic Torque for Design of Switched Flux Permanent Magnet Machine
Journal of Magnetics
2018 .06
-
Analysis of Torque Ripple and Cogging Torque Reduction and Vibration Characteristics by Changing Permanent Magnet Shape of 5 kW SPM Type Generator
Journal of Magnetics
2019 .06
-
A Study on Cogging Torque Reduction Design of the Consequent Pole IPMSM
한국자기학회 학술연구발표회 논문개요집
2024 .05
-
Design and Analysis of the Interior Permanent-Magnet Machine Considering Slot-pole Combination and Rotor Topology
Journal of Magnetics
2023 .09
-
PCB Motor Design for Reducing Cogging Torque in Motor of Collaborative Robot Joints
한국자기학회 학술연구발표회 논문개요집
2024 .11
-
Study on Reduction of Cogging Torque and Torque Ripple of Permanent Magnet Electric Motor Considering Magnetization Pattern Using Magnetization Yoke
한국자기학회 학술연구발표회 논문개요집
2020 .07
-
Electrical Parameter Comparison of 8-pole 6-slot and 8-pole 12-slot using Equivalent Magnetic Circuit for Servo motor
한국자기학회 학술연구발표회 논문개요집
2020 .07
-
Characteristic Analysis of Interior Permanent Magnet Synchronous Machine by considering Magnetization Patterns
Journal of Magnetics
2018 .06
-
코깅토크와 축력 특성을 고려한 자속집중형 전동기 설계 연구
한국자기학회지
2025 .02
-
Spoke type Permanent Magnet Synchronous Generator Design considering Magnetizing and Cogging Torque
한국자기학회 학술연구발표회 논문개요집
2022 .05
-
A Novel Semi-inserted Dual-stator Low-speed High-torque Permanent Magnet Drive Motor
Journal of Magnetics
2018 .12
-
Analysis of Electromagnetic Force according to the number of poles and slots for Ultra-high-speed permanent magnet synchronous motors
한국자기학회 학술연구발표회 논문개요집
2017 .11
-
Magnetic Field Analysis of Notched SPMSM Using Conformal Mapping
Journal of Magnetics
2019 .03
-
A Study on Reduction of Magnet Usage and Cogging Torque throught the Intersect Consequent Model
한국자기학회 학술연구발표회 논문개요집
2023 .05
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Slot opening에 따른 전기자동차 구동시스템용 50kW, 1500Nm급 외전형 직접 구동 인휠 모터 특성 해석
김관호
,
시효석
,
고경진
한국자동차공학회 추계학술대회 및 전시회
2022
.11
IPMSM 회전자 영구자석 위치 및 슬롯 오프닝 높이에 따른 유기전압 특성해석
윤승영
,
이호영
,
신진영
외 2명
대한전기학회 학술대회 논문집
2020
.07
IPMSM 고정자 Slot open 형상에 따른 인덕턴스 분석
이용복
,
박동진
,
김기찬
한국산학기술학회 학술대회논문집
2015
.05
슬롯 오픈이 전동기 소음에 미치는 영향 고찰
김수철
,
김규식
,
이병화
외 3명
대한전기학회 학술대회 논문집
2015
.07
Study the Effect of the open slots on the motor
Su chul Kim
한국소음진동공학회 학술대회논문집
2015
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-428-002656147