메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Yeh-Sun Hong (Korea Aerospace University) Jong-Hyeok Kim (Korea Aerospace University)
저널정보
유공압건설기계학회 유공압건설기계학회 학술대회논문집 유공압건설기계학회 2015年度 秋季 學術大會 論文集
발행연도
2015.10
수록면
149 - 154 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper both the volumetric displacement and the shaft speed of a variable displacement swashplate type piston pump were varied in order to minimize power consumption in supplying constant-pressure oil to a valve-controlled hydraulic cylinder, particularly during idle modes. At operating modes which were triggered by position command inputs, the pump speed was varied by a pressure control algorithm to maintain a constant system pressure, with the swash plate angle fixed at the maximum. At idle, with no position controller input signal and the system pressure greater than or equal to the reference value, the swash plate angle and pump speed were lowered to their minimum limits. Computer simulation and experimental results showed that the idling power could be reduced by up to 83% by reducing the pump speed from 1800 rpm to 300 rpm and the swash plate angle to 3°, compared to a conventional system consisting of a pressure-compensated variable displacement type pump driven at a constant speed of 1800 rpm.

목차

Abstract
1. Introduction
2. System configuration and modeling
3. Simulation and experiment results
4. Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-550-000683883