메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
전병욱 (부산대학교) 이광영 (원광보건대학교)
저널정보
대한치과재료학회 대한치과재료학회지 대한치과재료학회지 제43권 제2호(통권 제110호)
발행연도
2016.6
수록면
185 - 192 (8page)
DOI
10.14815/kjdm.2016.43.2.185

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study investigated the influence of sintering holding time on flexural strength of dental CAD/CAM zirconia. Thirty specimens of dental CAD/CAM zirconia were sintered at 1,500℃ applying three holding times(0, 2 and 5 h). The 3-point flexural strength of all specimens were measured with a universal testing machine, and analyzed by one-way ANOVA. The microstructural change was measured by FE-SEM and X-ray diffraction analysis were performed to estimate the phase transformation. The highest flexural strength was observed in groups sintered holding time of 2 hours(GS2 group). The flexural strength of the all specimens were not significantly different(p>0.05). The increase of sintering time, the grain size of zirconia will increase and result in a decrease of flexural strength. Based on the present study, it could be considered that the ideal sintering condition of 1,500℃ for 2 hours is recommended for the better strength.

목차

〈Abstract〉
Ⅰ. INTRODUCTION
Ⅱ. MATERIALS AND METHODS
Ⅲ. RESULTS
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Ⅵ. REFERENCES

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-515-000875159