지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.7
- 수록면
- 212 - 219 (8page)
이용수
초록· 키워드
오류제보하기
Objective: The purpose of this study was to evaluate treatment effects after distalization of the mandibular dentition using ramal plates through lateral cephalograms. Methods: Pre- and post-treatment lateral cephalograms and dental casts of 22 adult patients (11 males and 11 females; mean age, 23.9 ± 5.52 years) who received ramal plates for mandibular molar distalization were analyzed. The treatment effects and amount of distalization of the mandibular molars were calculated and tested for statistical significance. The significance level was set at p < 0.001. Results: The mandibular first molar distalization at the crown and root were 2.10 mm (p < 0.001) and 0.81 mm (p = 0.011), respectively. In the evaluation of skeletal variables, there was a significant increase in the Wits appraisal (p < 0.001). In the evaluation of the soft tissue, there was no significant effect on upper lip position, but the lower lips showed a significant retraction of 2.2 mm (p < 0.001). Conclusions: The mandibular molars showed a significant amount of distalization accompanied by limited extrusion and mesiobuccal rotation of the crowns. A ramal plate may be a viable device for mandibular total arch distalization in Class III patients who are reluctant to undergo orthognathic surgery.
목차
INTRODUCTION
MATERIALS AND METHODS
RESULTS
DISCUSSION
CONCLUSION
REFERENCES
참고문헌 (30)
참고문헌 신청
[학술지(정기간행물)] - Kim YH / 2000 / Stability of anterior openbite correction with multiloop edgewise archwire therapy: A cephalometric follow-up study / Am J Orthod Dentofacial Orthop 118 : 43 ~ 54
[학술지(정기간행물)] - Janson G / 2005 / Extreme dentoalveolar compensation in the treatment of Class III malocclusion / Am J Orthod Dentofacial Orthop 128 : 787 ~ 794
[학술지(정기간행물)] - Saito I / 2005 / Nonsurgical treatment of adult open bite using edgewise appliance combined with high-pull headgear and class III elastics / Angle Orthod 75 : 277 ~ 283
[학술지(정기간행물)] - Byloff F / 2000 / Mandibular molar distalization with the Franzulum Appliance / J Clin Orthod 34 : 518 ~ 523
[학술지(정기간행물)] - Celentano G / 2011 / Mandibular lip bumper for molar torque control / Prog Orthod 12 : 90 ~ 92
[학술지(정기간행물)] - Janson G / 2005 / Extreme dentoalveolar compensation in the treatment of Class III malocclusion / Am J Orthod Dentofacial Orthop 128 : 787 ~ 794
[학술지(정기간행물)] - Saito I / 2005 / Nonsurgical treatment of adult open bite using edgewise appliance combined with high-pull headgear and class III elastics / Angle Orthod 75 : 277 ~ 283
[학술지(정기간행물)] - Byloff F / 2000 / Mandibular molar distalization with the Franzulum Appliance / J Clin Orthod 34 : 518 ~ 523
[학술지(정기간행물)] - Celentano G / 2011 / Mandibular lip bumper for molar torque control / Prog Orthod 12 : 90 ~ 92
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Biomechanical analysis of distalization of mandibular molars by placing a mini-plate : A finite element study
대한치과교정학회지
2017 .09
-
Immediate changes in the mandibular dentition after maxillary molar distalization using headgear
대한치과교정학회지
2017 .03
-
성인 골격성 Ⅲ급 부정교합 환자에서 하학 전치열 후방이동 절충치료의 안정성
대한치과의사협회지
2019 .05
-
Maxillary total arch distalization using midpalatal mini-implant: Case report
Oral Biology Research
2017 .01
-
Biomechanical analysis for different mandibular total distalization methods with clear aligners: A finite element study
대한치과교정학회지
2023 .11
-
A reliable method for evaluating upper molar distalization : Superimposition of three-dimensional digital models
대한치과교정학회지
2015 .03
-
Comparative evaluation of molar distalization therapy using pendulum and distal screw appliances
대한치과교정학회지
2015 .07
-
Distalization with a modified C-palatal plate for severe upper crowding and a missing lower incisor
대한치과교정학회지
2020 .01
-
Comparison of treatment effects between the modified C-palatal plate and cervical pull headgear for total arch distalization in adults
대한치과교정학회지
2017 .11
-
Evaluation of the effects of the third molar on distalization and the effects of attachments on distalization and expansion with clear aligners: Three-dimensional finite element study
대한치과교정학회지
2025 .01
-
Total arch distalization with interproximal stripping in a patient with severe crowding
대한치과교정학회지
2019 .05
-
Analysis of midpalatal miniscrew-assisted maxillary molar distalization patterns with simultaneous use of fixed appliances : A preliminary study
대한치과교정학회지
2016 .01
-
Comparison of treatment effects between four premolar extraction and total arch distalization using the modified C-palatal plate
대한치과교정학회지
2018 .07
-
Key factors for successful eruption of the mandibular third molar after extraction of the mandibular second molar
대한치과교정학회지
2025 .03
-
A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage
대한치과교정학회지
2016 .09
-
Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches
대한치과교정학회지
2015 .09
-
Anatomical factors of the maxillary tuberosity that influence molar distalization
대한치과교정학회지
2024 .07
-
New prediction equations for the estimation of maxillary mandibular canine and premolar widths from mandibular incisors and mandibular first permanent molar widths : A digital model study
대한치과교정학회지
2016 .05
-
전치부 및 치은의 노출량과 교합평면의 캔팅을 고려한 미니스크류를 이용한 전치열의 원심이동
대한치과의사협회지
2019 .05
이 논문의 저자 정보
이 논문과 함께 이용한 논문
접착성 물질 첨가에 따른 장기 불소 방출용 불소 바니쉬의 개발
Soo-Auk Pa
,
k
,
Seung-Han Oh
외 1명
대한치과재료학회 학술대회
2017
.11
Biomechanical analysis of distalization of mandibular molars by placing a mini-plate : A finite element study
Myungsoon Pa
,
k
,
Yonghyun Na
외 3명
대한치과교정학회지
2017
.09
Cone-beam computed tomographic evaluation of the temporomandibular joint and dental characteristics of patients with Class II subdivision malocclusion and asymmetry
Mingna Huang
,
Yun Hu
,
Jinfeng Yu
외 3명
대한치과교정학회지
2017
.09
Immediate changes in the mandibular dentition after maxillary molar distalization using headgear
Sung-Ja Kang
,
Hyun-Hee Kim
,
Hyeon-Shik Hwang
외 1명
대한치과교정학회지
2017
.03
Finite-element analysis of the center of resistance of the mandibular dentition
A-Ra Jo
,
Sung-Seo Mo
,
Kee-Joon Lee
외 2명
대한치과교정학회지
2017
.01
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-515-001006303