본 연구에서는 바잘트 섬유 및 하이볼륨 플라이애시를 사용한 섬유보강 콘크리트의 개발을 위한 일환의 기초 연구로써 바잘트 섬유와 하이볼륨 플라이애시가 유동특성에 미치는 영향을 모르타르 수준에서 검토하였다. 첫 번째 단계에서는, 플라이애시 혼합률 6수준(10, 20, 30, 40, 50 및 60 mass%)에 따른 모르타르 유동특성과 바잘트 섬유의 분산을 위하여 SP 사용량 5수준(1.3, 1.5, 1.7, 1.9 및 2.1%) 및 VA 첨가량 5수준(0.2, 0.4, 0.6, 0.8 및 1.0%)에 따른 모르타르 유동특성을 검토하였으며, 두 번째 단계에서는, 바잘트 섬유길이 3수준(6, 20 및 30mm) 에 대하여 하이볼륨 플라이애시(50 mass%)를 적용한 모르타르의 유동특성 을 평가하였다. 실험결과, 섬유를 혼합한 배합의 경우 섬유 분산성 개선에는 SP 보다 VA가 더 효과적인 것으로 나타났으며, 하이볼륨 플라이애시(50%)를 적용한 배합이 FA 특성에 기인하여 섬유 분산성 개선 및 플로우 향상 효과가 있는 것으로 나타났다.
This study was evaluated influence of fluidity properties according to basalt fiber and high volume fly ash in the mortar level, as part of a basic study for development of fiber reinforced concrete using basalt fiber and high volume fly ash. In the first step, it was evaluated that fluidity properties of mortar according to replacement ratio 6 level of fly ash(10, 20, 30, 40, 50 and 60mass%) and fluidity properties of mortar according to content 5 levels of SP(1.3, 1.5, 1.7, 1.9 and 2.1%) and content 5 levels of VA(0.2, 0.4, 0.6, 0.8 and 1.0%) for dispersion of the basalt fiber, in the second step, it was evaluated that fluidity properties of mortar using High-volume fly ash (50mass%) on 3 levels of basalt fiber length (6, 20 and 30mm). Results of assessment, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer, high volume fly ash (50%) applying the mixing, due to three properties of fly ash, showed that the improved fiber dispersibility and flow improvement.