메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
어광준 (한국기계연구원) 김형욱 (한국기계연구원) 김수현 (한국기계연구원) 이윤수 (한국기계연구원) 오영미 (한국기계연구원)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2014년도 한국소성가공학회 추계학술대회 논문집
발행연도
2014.10
수록면
52 - 55 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (8)

초록· 키워드

오류제보하기
Aluminum clad sheets are widely used as brazing materials for automotive heat exchangers due to their high specific strength and thermal conductivity. In this study, aluminum clad sheets are fabricated by the roll bonding process with strip-cast aluminum alloys. The clad sheets for heater tube are manufactured using twin-roll-cast(TRC) AA3527 and AA4343 alloys and further cold-rolled down to thickness of 0.2 mm with final annealing at 360, 380, and 400℃. Condenser fins are produced using TRC 3003Z and AA4343 alloys and intermediate annealing at the different temperatures is conducted during cold rolling. The effect of annealing temperature on the tensile, erosion, sag properties of aluminum clad sheets is investigated.

목차

Abstract
1. 서론
2. 히터튜브용 클래드 판재
3. 콘덴서 핀용 클래드 박판
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-551-000833326