지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2014.10
- 수록면
- 129 - 132 (4page)
이용수
이 논문의 연구 히스토리 (3)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
This paper is concerned with prediction of fracture strains for DP980 steel sheets at a wide range of loading paths. The usage of DP980 steel is significantly increasing in automotive industries for enhanced safety and high fuel efficiency. The material behavior of advanced high-strength steels (AHSSs) sheets show unpredictable and sudden fracture in sheet metal forming processes. A modified Lou-Huh ductile fracture criterion is utilized to predict the formability of AHSSs because the conventional forming limit diagram (FLD) constructed based on necking is unable to evaluate the formability of AHSSs. Fracture loci were extracted from three dimensional fracture envelopes by assuming the plane stress condition to evaluate equivalent plastic strains at the onset of fracture at a wide range of loading paths. Three different types of specimens such as pure shear, dog-bone and plane strain grooved specimens were utilized for tensile tests to calibrate the fracture model of DP980 steel sheets. Fracture strains of each loading path were evaluated to show that there is little deviation between fracture strains predicted from the fracture model and experimentally acquired ones. Through the comparison, it is clearly shown that the three dimensional fracture envelopes can accurately predict the onset of the fracture of DP980 steel sheets in complicated loading conditions from compressive loading, and shear to equi-biaxial tension.
목차
Abstract
1. 서론
2. Lou-Huh 연성파단모델의 수정
3. DP980 강판의 3차원 파단곡면 구성
4. 결론
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-551-000833513