메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이용태 (세종대학교) 김민호 (세종대학교) 정재동 (세종대학교) 김선태 (삼성전자) 김태헌 (삼성전자)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2016년도 동계학술발표대회 논문집
발행연도
2016.11
수록면
18 - 21 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The latent heat thermal storage system has been widely adopted to air conditioning for cooling and heating due to the high thermal storage density. However, most type of its application were designed to deal with only either the cooling or heating load. To overcome this drawback, this study considers the thermal storage tank with combined cooling and heating PCM for both operation. Five ratio, from 100% cooling PCM to 100% heating PCM with reducing 25% of cooling PCM, were investigated to estimate the cooling performance. The cooling mode is divided into the charging and discharging process. The performance of each process is evaluated by using the definition of thermal storage density, which is the ratio of storage energy versus tank volume. The maximum thermal storage density was found about 35kwh/m³ and 18.5kwh/m³ at discharging and charging process respectively, whereas the minimum values were approximately 14.5kwh/m³ and 9.5kwh/m³ at each process.

목차

Abstract
1. 서론
2. 수치해석
3. 시뮬레이션 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-553-001924726