메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이지영 (경상대학교) 김철환 (경상대학교) 권솔 (경상대학교) 임현택 (경상대학교) 김중호 (전주페이퍼)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제48권 제6호(통권 제173호)
발행연도
2016.12
수록면
81 - 88 (8page)
DOI
10.7584/JKTAPPI.2016.12.48.6.81

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study focused to investigate the softening effect of pine (Pinus densiflora ) chips using various pulping conditions for chemithermomechanical pulp (CTMP). In order to evaluate the softening effect of pine chips, shive contents, sulfur contents in wood chips and freeness were measured. The softening experiments were conducted by varying the mixing ratio of NaOH and Na₂SO₃ in order to soften the wood chips under different impregnation temperature. Under the same refining condition, addition ratios of NaOH and Na2SO3 did rarely affect the softening of wood chips. On the other hand, soaking temperature played a vital role in decreasing freeness. For sulfur contents in wood chips, 10% addition of Na₂SO₃ on oven-dried wood weight did have a significant impact on the increase of sulfur. In particular, higher impregnation temperature over 120°C contributed to the greater sulfur contents compared to 100°C. It can be confirmed that soaking temperature and the addition ratio of Na₂SO₃ had a great influence on the sulfonation of lignin. More softened chips might generate lower contents of shives in CTMP than less softened ones. In conclusions, in order to soften wood chips as raw materials for CTMP, soaking temperature must be maintained at over 100°C, and the amount of Na₂SO₃ played a more important role than that of NaOH. More softened chips could contribute to the reduction of refining energy.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-586-002063023