지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제40권 제10호
- 발행연도
- 2016.12
- 수록면
- 883 - 887 (5page)
이용수
초록· 키워드
오류제보하기
This study aims to evaluate the corrosion behavior of a newly developed high-strength steel in marine environments. Metals used in seawater are easily deteriorated because of the presence of corrosive species such as chloride ions in it. Seawater causes much higher corrosion than fresh water. Thus, the corrosion of steel in marine environment has been recognized as a crucial problem in designing structures which cannot be cathodically protected. In this study, the corrosion resistance of a newly developed high-strength steel was evaluated. Four different specimens were tested to confirm the corrosion resistance. The exposure corrosion test was carried out by exposing the specimens to different marine environments such as atmospheric, tidal, splash, and submerged zones for two years. The specimens taken out from each location were cleaned ultrasonically and chemically prior to the evaluation of their corrosion resistance by the weight loss method. Finally, the pitting depth of the specimens was also measured to evaluate their pitting corrosion. The conditions used for the corrosion test were similar to the environmental conditions. The corrosion test results revealed that the corrosion rate and pitting corrosion of the newly developed high-strength steel was lower than that of the other carbon steels.
목차
Abstract
1. Introduction
2. Experimental Method
3. Experimental Results
4. Conclusions
Reference
참고문헌 (9)
참고문헌 신청
[단행본] - D. A. Jones / 1996 / Principle and Prevention of Corroaion / Prentice Hall
[학술지(정기간행물)] - R. Feng / 2016 / Electrochemical corrosion of ultra-high strength carbon steel in alkaline brines containing hydrogen sulfide / Journal of Electrochemica Acta 212 (10) : 998 ~ 1009
[학술지(정기간행물)] - X. Guo / 2015 / Stress corrosion cracking behavior of high strength casing steel in working fluids / Journal of Natural Gas Science and Engineering 29 : 134 ~ 140
[학술지(정기간행물)] - I. J. Park / 2014 / Pitting corrosion behavior in advanced high strength steels / Journal of Alloys and Compounds 619 (15) : 205 ~ 210
[학술지(정기간행물)] - N. Michailidis / 2014 / Influence of galvanization on the corrosion fatigue performance of high-strength steel / Surface and Coatings Technology 259 (Part C) : 456 ~ 464
[학술지(정기간행물)] - R. Feng / 2016 / Electrochemical corrosion of ultra-high strength carbon steel in alkaline brines containing hydrogen sulfide / Journal of Electrochemica Acta 212 (10) : 998 ~ 1009
[학술지(정기간행물)] - X. Guo / 2015 / Stress corrosion cracking behavior of high strength casing steel in working fluids / Journal of Natural Gas Science and Engineering 29 : 134 ~ 140
[학술지(정기간행물)] - I. J. Park / 2014 / Pitting corrosion behavior in advanced high strength steels / Journal of Alloys and Compounds 619 (15) : 205 ~ 210
[학술지(정기간행물)] - N. Michailidis / 2014 / Influence of galvanization on the corrosion fatigue performance of high-strength steel / Surface and Coatings Technology 259 (Part C) : 456 ~ 464
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer
Structural engineering and mechanics : An international journal
2018 .01
-
Effect of Microstructure Features on the Corrosion Behavior of the Sn‑2.1 wt%Mg Solder Alloy
Electronic Materials Letters
2020 .01
-
부식전류를 이용한 부식촉진시험 조건별 대기부식성 등급 평가 방법의 유효성 검증
한국강구조학회 학술대회 발표집
2021 .06
-
해양 금속재료의 부식속도와 방식전류에 미치는 유속의 영향
Corrosion Science and Technology
2015 .01
-
Corrosion of Steel in Concrete Structures
대한토목학회지
2018 .06
-
Prediction of tensile strength degradation of corroded steel based on in-situ pitting evolution
Steel and Composite Structures, An International Journal
2023 .02
-
The corrosion measurement of reinforced concrete specimens using Pt/Ti electrode
Journal of Advanced Marine Engineering and Technology (JAMET)
2019 .06
-
Local mechanical properties of corrosion layers formed on T91 and SS316L steels after exposure to static liquid LBE at 500 °C for 1000 h obtained by nano-indentation
Nuclear Engineering and Technology
2024 .08
-
Accelerated Prediction Methodologies to Predict the Outdoor Exposure Lifespan of Galvannealed Steel
Corrosion Science and Technology
2019 .01
-
Prediction of pitting corrosion for stainless steels using artificial neural network
한국표면공학회 학술발표회 초록집
2020 .12
-
Effect of Ascorbic Acid on the Pitting Resistance of 316L Stainless Steel in Synthetic Tap Water
Metals and Materials International
2016 .01
-
Prediction of Pitting Corrosion behavior of stainless Steel using Artificial Neural Network Method
한국표면공학회 학술발표회 초록집
2020 .06
-
회귀분석을 통한 DH순환수 환경 부식인자에 따른 두께 감육량 산출식 도출
대한설비공학회 학술발표대회논문집
2022 .06
-
Study on the flexural behavior of corroded built-up cold-formed thin-walled steel beams
Steel and Composite Structures, An International Journal
2020 .01
-
Monitoring degradation in concrete filled steel tubular sections using guided waves
Smart Structures and Systems, An International Journal
2017 .01
-
액화 이산화탄소가 용해된 염수 환경에서의 금속 부식 및 마모 거동에 대한 연구
Tribology and Lubricants
2024 .12
-
Strength degradation of reinforced concrete piers wrapped with steel plates under local corrosion
Steel and Composite Structures, An International Journal
2017 .01
-
Monitoring degradation in concrete filled steel tubular sections using guided waves
Smart structures and systems
2017 .01
-
강구조물의 부식수명예측 및 방식기술
한국강구조학회지
2015 .02
-
LiBr 수용액 내 부식억제제 농도에 따른 탄소강의 부식 깊이에 대한 통계적 분석
대한설비공학회 학술발표대회논문집
2019 .11
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-559-002063420