메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
황동현 (Hankyong National University) 이우철 (Hankyong National University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제31권 제1호
발행연도
2017.1
수록면
79 - 87 (9page)
DOI
10.5207/JIEIE.2017.31.1.079

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A non-inverting buck-boost converter is used to keep the output voltage constant if the range of variation of the input voltage is lower or higher than the desired output voltage. It has a wide input/output voltage range and the output voltage is not inverted unlike a typical buck-boost converter. The non-inverting buck-boost converter is classified into continuous current mode, discontinuous current mode, and critical conduction mode depending on the inductor current. The losses of the switching device depends on the current modes and the efficiency of converter is also different. Therefore, in this paper, the converter is controlled by the fixed frequency method and the critical conduction mode method to compare the converter efficiency according to the current modes at low power. In each control method, the losses of the switching element were calculated and compared. Simulation and experiment were performed to confirm the calculated results.

목차

Abstract
1. 서론
2. 비 반전 Buck-Boost 컨버터
3. 손실 분석
4. 시뮬레이션
5. 실험
6. 결론
References

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-565-002024005