메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박준모 (서울과학기술대학교) 손영한 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2017년도 하계학술발표대회 논문집
발행연도
2017.6
수록면
1,031 - 1,034 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This experimental study was performed to measure flow boiling heat transfer coefficients in a brazed plate heat exchanger. R22 and R410A were used as refrigerants in this experiment. The tested heat exchanger was operated as an evaporator. The subcooled or saturated states of refrigerants at the evaporator inlet were controlled by a pre-heater powered by electricity. A test facility was built up to measure the boiling flow heat transfer coefficients at the conditions of the average vapor quality from 0.2 to 0.65, mass flow rate of 15 g/s, saturation temperature of 25℃, and heat flux from 3 kW/m² to 11 kW/m². The refrigerant outlet quality was calculated by chilled water temperature difference and mass flow rate. Flow boiling heat transfer coefficients of R410A was up to 32% lager than those of R22. The comparison of the experimental data with the predicted values by previously presented correlations showed that the deviation was the range of from −80% to 20%.

목차

Abstract
1. 연구배경 및 목적
2. 실험 장치 및 실험 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0