메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이인범 (계양정밀) 홍성기 (계양정밀) 김구성 (계양정밀) 최복록 (강릉원주대학교)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제25권 제5호
발행연도
2017.9
수록면
533 - 540 (8page)
DOI
10.7467/KSAE.2017.25.5.533

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The rotating shaft of a turbocharger is usually supported by two oil-lubricated journal bearings and a thrust bearing. The turbocharger rotor is the main cause of mechanical friction losses, which strongly influence the efficiency and performance of a high-speed turbocharger. In this paper, we investigated the mechanical friction losses of a turbocharger bearing system by using analytical and experimental methods. The SAE 10W-30 grade engine oil was used for lubricating the turbocharger rotor bearings of the 1.4 L gasoline engine. Petroff’s equation and the CFD method were used to calculate the mechanical friction loss, and the analytical results were verified by the experimental results that used calorimetric measurement techniques. Meanwhile, in order to measure the mechanical friction loss of pure radial journal bearings, the experiment was conducted in the operating ranges without axial thrust loads. Based on the analytical and experimental results, it was found that the mechanical friction loss was mainly induced by oil-lubricated journal bearings, and its magnitude varied in the form of a parabolic function with respect to the turbocharger’s rotation speed. In addition, the theoretical results were in good agreement with the experimental results.

목차

Abstract
1. 서론
2. 관련 이론
3. 윤활온도 예측을 위한 CFD 해석
4. 실험적 방법
5. 결과 및 고찰
6. 결론
References

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-556-001182396