메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
문주현 (중앙대학교) 이성혁 (중앙대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2017년도 동계학술발표대회 논문집
발행연도
2017.11
수록면
386 - 389 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The present study examines the droplet evaporation characteristics for a sessile droplet on the heated anodized surfaces. Using the anodization method, the nano-sized hole patterns can be fabricated on bare substrate to increase heat transfer area and surface energy. Etching time was controlled for making different hole patterns by the oxalic acid with 50 V. In the experiment, the surface temperature was varied in the range from 20 ℃ to 90 ℃.We measured the apparent contact angle (ECA) of DI-water on anodized surfaces, observing the substantial increase of wettability . The droplet size evolution was visualized during evaporation with the use of the CCD camera, and the captured images were analyzed by using the ImageJ software. It is found that the ratio of interfacial areas and surface energy rises at the anodized surfaces. When using the anodized surfaces, the total evaporation time decreases at the anodized substrate, indicating that higher heat transfer is achieved by the increase in the heat transfer area after anodization.

목차

Abstract
1. 서론
2. 실험방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-553-001583809