지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.2
- 수록면
- 95 - 102 (8page)
이용수
초록· 키워드
오류제보하기
The purpose of this study is evaluation of proper welding condition in order to solve the problems such as cast iron weld cracking, HAZ embrittlement. The formation of martensite in welding of the gray cast iron by arc welding is related to weld cracking. The effect of pre-heating and post-heating to microstructure and hardness of weld joint were examined. Main results obtained were as follows.
In case of autogenous welding by GTAW, the number of crack was significantly decreased with increasing welding heat input and pre-heat temperature. But crack sensitivity was increased by martensite formation due to increasing cooling rate with increasing of base metal thickness.
In case of bead on plate welding by GTAW, crack sensitivity was increased with increasing welding current, and welding current exhibiting no crack was increased with pre-heat temperature.
The most of cracks formed at deposited weld metal were solidification crack in the case of 316L buttering. The main cause of GTAW deposited metal cracking was martensitic transformation. The GTAW range for crack free was very severe and narrow.
To minimize the welding crack sensitivity, buttering gray cast iron by 316L welding electrode was very effective and the application of preheating made welding range broad.
In case of autogenous welding by GTAW, the number of crack was significantly decreased with increasing welding heat input and pre-heat temperature. But crack sensitivity was increased by martensite formation due to increasing cooling rate with increasing of base metal thickness.
In case of bead on plate welding by GTAW, crack sensitivity was increased with increasing welding current, and welding current exhibiting no crack was increased with pre-heat temperature.
The most of cracks formed at deposited weld metal were solidification crack in the case of 316L buttering. The main cause of GTAW deposited metal cracking was martensitic transformation. The GTAW range for crack free was very severe and narrow.
To minimize the welding crack sensitivity, buttering gray cast iron by 316L welding electrode was very effective and the application of preheating made welding range broad.
목차
Abstract
1. 서론
2. 실험 방법
3. 실험 결과 및 고찰
4. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Comparison of the Characteristics of FCAW and SAW for the Brittle Crack Propagation of Welded Parts of BCA Steel in Container Ships
한국기계가공학회지
2021 .03
-
FEM을 이용한 초음파 용착부의 온도분포 해석
한국생산제조학회지
2016 .04
-
4차 산업혁명에 적합한 미래용접의 모습은?
대한용접학회 특별강연 및 학술발표대회 개요집
2017 .11
-
The investigation crack problem through numerical analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
빅 데이터(Big Data)를 이용한 용접품질에 연구
제어로봇시스템학회 논문지
2021 .12
-
균열 보수 락을 이용한 대형 주철 균열재의 냉간 체결 방법에 관한 연구
한국생산제조학회지
2023 .06
-
철도차량 하부구조의 적정 용접조건에 관한 연구
한국기계가공학회지
2021 .04
-
Weld Characteristic Analysis for Weld Process Variables of Tip-Rotating Arc Welding in Butt Joint of Shipbuilding Steels
한국기계가공학회지
2021 .07
-
GTAW를 적용한 맞대기 초층 용접에서 이면 비드 형성 조건에 관한 연구
대한용접·접합학회지
2023 .10
-
복합균열 배관의 평가를 위한 등가 배관 선정
대한기계학회 춘추학술대회
2015 .11
-
인코넬 713C 합금의 레이저 용접성 평가
대한용접·접합학회지
2017 .02
-
312계 용가재 적용에 따른 XM-19 스테인리스강 용접부 미세조직 및 기계적 성질
대한용접·접합학회지
2025 .04
-
패널데이터분석을 활용한 여러 가지의 용접 기술들과 관련된 용접산업의 현황 분석에 관한 연구
한국기계기술학회지
2020 .01
-
Global Market Analysis for Welding Power Source and Welding Robot (I)
대한용접·접합학회지
2020 .06
-
Comparative study on cracked beam with different types of cracks carrying moving mass
Structural engineering and mechanics : An international journal
2015 .01
-
C형 용가재를 사용한 GTAW 공정에서 랩조인트 필릿 용접의 공정 강건성 검토를 위한 연구
대한용접·접합학회지
2019 .10
-
Recent Research Trend of Arc Welding Quality Monitoring Technology in Korea
대한용접·접합학회지
2023 .04
-
Crack analysis of reinforced concrete members with and without crack queuing algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
굽힘 모멘트가 작용하는 두개의 층으로 구성된 용접배관 균열의 J-적분 및 균열열림변위 계산
대한기계학회 춘추학술대회
2018 .12
-
Effect of Cracking on Corrosion of Steel in Concrete
International Journal of Concrete Structures and Materials
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-581-001832841