지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한산업공학회 Industrial Engineering & Management Systems Industrial Engineering & Management Systems Vol.17 No.1
- 발행연도
- 2018.3
- 수록면
- 1 - 13 (13page)
- DOI
- 10.7232/iems.2018.17.1.001
이용수
초록· 키워드
오류제보하기
Remanufacturing is one of advanced product recovery options in which end-of-use/life products are reprocessed in such a way that their appearances and qualities are as good as new. In this study, we consider dynamic lot-sizing in remanufacturing systems that consist of a single disassembly facility, parallel reprocessing facilities and a single reassembly facility. The problem is to determine the disassembly, reprocessing and reassembly lot-sizes that satisfy the remanufactured product demands over a planning horizon. As a significant extension of the previous study, we consider the processing time capacity of each facility explicitly, and hence more realistic and applicable solutions can be obtained. To represent the problem mathematically, a mixed integer programming model is developed for the objective of minimizing the sum of setup, operation and inventory holding costs. Then, due to the problem complexity, we suggest three variants of the fix-and-optimize based heuristic that fixes a portion of binary variables and solves the resulting problems iteratively. Computational experiments were done on various test instances and the test results show that the one that fixes the binary setup variables by the overlapped-period method performs better than the others and gives near optimal solutions within a reasonable amount of computation time.
목차
ABSTRACT
1. INTRODUCTION
2. SYSTEM AND PROBLEM DESCRIPTIONS
3. SOLUTION ALGORITHMS
4. COMPUTATIONAL RESULTS
5. CONCLUDING REMARKS
REFERENCES
참고문헌 (29)
참고문헌 신청
Ahn, H. D. / 2011 / Solution algorithms for dynamic lot-sizing in remanufacturing systems / International Journal of Production Research 49(22):6729~6748
Bitran, G. R. / 1982 / Computational complexity of the capacitated lot size problem / Management Science 28(10):1174~1186
Clegg, A. J. / 1995 / Production planning for companies with remanufacturing capability / Proceedings of the IEEE international Symposium on Electronics and the Environment :186~191
Cunha, J. O. / 2016 / A computational comparison of formulations for the economic lotsizing with remanufacturing / Computers & Industrial Engineering 92:72~81
Doh, H. H. / 2010 / Generic production planning model for remanufacturing systems / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224(B1):159~168
Bitran, G. R. / 1982 / Computational complexity of the capacitated lot size problem / Management Science 28(10):1174~1186
Clegg, A. J. / 1995 / Production planning for companies with remanufacturing capability / Proceedings of the IEEE international Symposium on Electronics and the Environment :186~191
Cunha, J. O. / 2016 / A computational comparison of formulations for the economic lotsizing with remanufacturing / Computers & Industrial Engineering 92:72~81
Doh, H. H. / 2010 / Generic production planning model for remanufacturing systems / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224(B1):159~168
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
다수의 유한 재생산률과 다종의 컨테이너를 고려한 동적 폐기물 회수계획 및 다종제품 재생산계획 문제
대한산업공학회 추계학술대회 논문집
2015 .11
-
Dynamic Waste Collection and Multi-Product Remanufacturing Planning with Multiple Finite Remanufacturing Rates
Industrial Engineering & Management Systems
2018 .06
-
폐기물 처분과 유한 재생산률을 고려한 동적 폐기물 회수계획 및 다종제품 재생산계획 문제
대한산업공학회 춘계공동학술대회 논문집
2016 .04
-
재제조에서 제품 해체 및 재조립 공정의 상해 위험성평가
한국안전학회지
2018 .01
-
Planning Demand- and Legislation-Driven Remanufacturing for a Product Family : A Model for Maximizing Economic and Environmental Potential
Industrial Engineering & Management Systems
2015 .06
-
자동차용 교류발전기 고정자 및 회전자의 재제조 공정 개선
한국생산제조학회지
2017 .10
-
A Study on the Development of Standardization Technology for Remanufacturing Process of Used Vertical Machining Center
Journal of the Korean Society for Precision Engineering
2017 .08
-
Dynamic Lot-sizing Algorithms for Disassembly and Reprocessing Processes in Remanufacturing Systems with Multi-level Structured Products
대한산업공학회 추계학술대회 논문집
2020 .11
-
산업용 유압실린더 재제조 기술개발
한국생산제조학회지
2018 .12
-
Capacitated dynamic lot-sizing for remanufacturing systems with a single disassembly and parallel reprocessing workstations
대한산업공학회 춘계공동학술대회 논문집
2015 .04
-
자동차 디젤 인젝터 재제조품의 성능 분석에 관한 연구
한국자동차공학회논문집
2021 .02
-
재제조 산업 및 재제조제품품질인증 동향
대한기계학회 춘추학술대회
2020 .12
-
공작기계 재제조 REMAN 인증 절차
한국정밀공학회 학술발표대회 논문집
2017 .12
-
노후 선반의 재제조 공정 표준화 기술 개발에 관한 연구
한국생산제조학회 학술발표대회 논문집
2021 .07
-
Development of hybrid manufacturing/remanufacturing system
대한산업공학회 추계학술대회 논문집
2015 .11
-
최신 공작기계 재제조 산업 및 기술 동향
한국정밀공학회 학술발표대회 논문집
2017 .05
-
Due-date based scheduling for remanufacturing systems with parallel disassembly, job-shop-type reprocessing and parallel reassembly workstations
대한산업공학회 춘계공동학술대회 논문집
2017 .04
-
Shifting bottleneck based scheduling algorithms for reprocessing and reassembly operations in remanufacturing systems
대한산업공학회 춘계공동학술대회 논문집
2015 .04
-
구조해석을 이용한 대형 플래너밀러 샤프트 재제조에 관한 연구
한국기계가공학회지
2022 .10
-
재 제조 프로세스를 가진 순환 형 SCM에서의 비선형 퍼지 함수 기반 가격 정책 프레임웍
산업경영시스템학회지
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0