메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jeong-Jin Yoo (Chungnam National University) Seung-Han Lee (Chungnam National University) Kyung-Hun Shin (Chungnam National University) Han-Wook Cho (Chungnam National University)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.23 No.1
발행연도
2018.3
수록면
68 - 73 (6page)
DOI
10.4283/JMAG.2018.23.1.068

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The manufacturing errors of machine tools are usually due to the imperfect of bearings, stiffness of spindle, assembly errors, and so on. In addition, the rotor eccentricity of the permanent magnet (PM) machine affects to the constant torque and speed characteristic of mechanical loads. The errors due to rotor eccentricity is caused by manufacturing process and rotor eccentricity generate unbalanced magnetic force (UMF). The sources of UMF are generated by the interaction between the rotor magnets and the stator core. Firstly, we suggested that the characteristic analysis results due to rotor eccentricity are calculated by using finite-element (FE) analysis. Moreover, we proposed experimental set to measure the UMF on the PM machines. Finally, we verified the validity of the proposed UMF measurement system by comparison with the measured results and simulation results due to the rotor eccentricity in the PM machine.

목차

1. Introduction
2. Unbalanced Magnetic Force in PM Machine
3. FE Analysis of Rotor Eccentricity
4. Force Measurement System
5. Results and Discussion
6. Conclusion
References

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-428-001901009