지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.2 No.4
- 발행연도
- 2009.12
- 수록면
- 269 - 277 (9page)
- DOI
- http://dx.doi.org/10.5293/IJFMS.2009.2.4.269
이용수
초록· 키워드
오류제보하기
The current paper focuses on the analysis of transient cavitating flow in pressurised polyethylene pipes, which are characterized by viscoelastic rheological behaviour. A hydraulic transient solver that describes fluid transients in plastic pipes has been developed. This solver incorporates the description of dynamic effects related to the energy dissipation (unsteady friction), the rheological mechanical behaviour of the viscoelastic pipe and the cavitating pipe flow. The Discrete Vapour Cavity Model (DVCM) and the Discrete Gas Cavity Model (DGCM) have been used to describe transient cavitating flow. Such models assume that discrete air cavities are formed in fixed sections of the pipeline and consider a constant wave speed in pipe reaches between these cavities. The cavity dimension (and pressure) is allowed to grow and collapse according to the mass conservation principle. An extensive experimental programme has been carried out in an experimental set-up composed of high-density polyethylene (HDPE) pipes, assembled at Instituto Superior Tcnico of Lisbon, Portugal. The experimental facility is composed of a single pipeline with a total length of 203 m and inner diameter of 44 mm. The creep function of HDPE pipes was determined by using an inverse model based on transient pressure data collected during experimental runs without cavitating flow. Transient tests were carried out by the fast closure of the ball valves located at downstream end of the pipeline for the non-cavitating flow and at upstream for the cavitating flow. Once the rheological behaviour of HDPE pipes were known, computational simulations have been run in order to describe the hydraulic behaviour of the system for the cavitating pipe flow. The calibrated transient solver is capable of accurately describing the attenuation, dispersion and shape of observed transient pressures. The effects related to the viscoelasticity of HDPE pipes and to the occurrence of vapour pressures during the transient event are discussed.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
NUMERICAL MODELS FOR TRANSIENT FLOW IN A PIPE
대한토목학회 학술대회
2007 .10
-
Heat Pipe Transient Simulation Model
International Symposium on Transport Phenomena in Thermal Engineering
1993 .05
-
FAST MODELS FOR TRANSIENT ANALYSIS OF PIPE NETWORKS
한국수자원학회 학술발표회
2005 .01
-
A High Resolution Scheme for Cavitating Flow
한국전산유체공학회 학술대회논문집
2005 .10
-
Discharge Performance of Impingging Injector for Cavitating Flow
International Journal of Aeronautical and Space Sciences
2004 .05
-
TWO DIMENSIONAL SIMULATION OF UNSTEADY CAVITATING FLOW IN A CASCADE
한국전산유체공학회 학술대회논문집
2005 .10
-
IMPULSE RESPONSE METHOD FOR SOLVING HYDRAULIC TRANSIENTS IN VISCOELASTIC PIPES
한국수자원학회 학술발표회
2005 .01
-
Numerical Simulation of Cavitating Flow Past Cylinders
한국전산유체공학회 학술대회논문집
2008 .03
-
Study on Flow Field of High Pressure Cavitating Waterjet
International Conference on Fluid Machinery
1997 .10
-
수치해석을 통한 건설중장비 유압시스템용 파이프설계에 대한 연구
한국기계가공학회지
2019 .09
-
NUMERICAL METHODS FOR CAVITATING FLOW
한국전산유체공학회 학술대회논문집
2001 .10
-
Numerical Analysis of Transient Flow through a Pipe Orifice Starting from Initial Steady Flow
KSME/JSME THERMAL and FLUID Engineering Conference
1994 .07
-
Numerical Study of Cavitating Flow Structure on a Hydrofoil
KSME/JSME THERMAL and FLUID Engineering Conference
1998 .08
-
Prediction Method of an In-pipe robot’s Orientation to pass in a Curved Pipe
제어로봇시스템학회 국제학술대회 논문집
2009 .08
-
FAILURE ASSESSMENT OF HYDRAULIC OIL PIPE UNDER TRANSIENT VIBRATION
한국소음진동공학회 국제학술발표논문집
2008 .07
-
측류유동을 고려한 실린더 주위의 캐비테이션 유동 현상 해석
한국전산유체공학회 학술대회논문집
2009 .04
-
Wave speed Measurement in Viscoelastic Pipes
유공압건설기계학회 학술대회논문집
2011 .06
-
Computer Simulations of Transient Flow in a Real City Water Distribution System
KSCE JOURNAL OF CIVIL ENGINEERING
2007 .01
-
Numerical Methodology to Predict and Analyze Cavitating Flows in a Kaplan Turbine
International Journal of Fluid Machinery and Systems
2019 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-554-001909237