지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.3 No.2
- 발행연도
- 2010.6
- 수록면
- 150 - 159 (10page)
- DOI
- http://dx.doi.org/10.5293/IJFMS.2010.3.2.150
이용수
초록· 키워드
오류제보하기
Laidback fan shaped film-cooling hole is formulated numerically and optimized with the help of three-dimensional numerical analysis, surrogate methods, and the multi-objective evolutionary algorithm. As Pareto optimal front produces a set of optimal solutions, the trends of objective functions with design variables are predicted by hybrid multi-objective evolutionary algorithm. The problem is defined by four geometric design variables, the injection angle of the hole, the lateral expansion angle of the diffuser, the forward expansion angle of the hole, and the ratio of the length to the diameter of the hole, to maximize the film-cooling effectiveness compromising with the aerodynamic loss. The objective function values are numerically evaluated through Reynolds- averaged Navier-Stokes analysis at the designs that are selected through the Latin hypercube sampling method. Using these numerical simulation results, the Response Surface Approximation model are constructed for each objective function and a hybrid multi-objective evolutionary algorithm is applied to obtain the Pareto optimal front. The clustered points from Pareto optimal front were evaluated by flow analysis. These designs give enhanced objective function values in comparison with the experimental designs.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
막냉각 효율의 증진을 위한 홴 형상 홀의 최적설계
대한기계학회 춘추학술대회
2009 .05
-
홴형상 막냉각홀의 신경회로망 기법을 이용한 최적설계
한국유체기계학회 논문집
2009 .08
-
신경회로망기법을 사용한 원통형 막냉각 홀의 최적설계
대한기계학회 논문집 B권
2008 .12
-
Co-Evolutionary Algorithms for Solving Multi-objective Optimization Problem
제어로봇시스템학회 국제학술대회 논문집
2002 .10
-
Optimal Controller Design for Single-Phase PFC Rectifiers Using SPEA Multi-Objective Optimization
JOURNAL OF POWER ELECTRONICS
2012 .01
-
다중목적 최적화기법을 이용한 원심압축기 임펠러 설계
대한기계학회 춘추학술대회
2009 .05
-
On Analog Circuit Design Methodology via Multi-Objective Geometric Programming
ITC-CSCC :International Technical Conference on Circuits Systems, Computers and Communications
2008 .07
-
Multi-Objective Optimal Design of a Single Phase AC Solenoid Actuator Used for Maximum Holding Force and Minimum Eddy Current Loss
Journal of Electrical Engineering & Technology
2008 .06
-
크리깅 기법을 이용한 원통형 막냉각 홀의 최적설계
대한기계학회 춘추학술대회
2008 .11
-
Numerical investigation of adiabatic film cooling effectiveness through the variation of the compound angle
한국유체기계학회 학술대회 논문집
2019 .07
-
Congestion Management in Deregulated Power System by Optimal Choice and Allocation of FACTS Controllers Using Multi-Objective Genetic Algorithm
Journal of Electrical Engineering & Technology
2009 .12
-
Energy Efficient Design of a Jet Pump by Ensemble of Surrogates and Evolutionary Approach
International Journal of Fluid Machinery and Systems
2016 .09
-
Pareto 최적점 기반 다목적함수 기법 개발에 관한 연구
대한조선학회 논문집
2005 .04
-
Bi-Objective Optimization for Aircraft Conflict Resolution Using Epsilon-Constraint Method and TOPSIS
제어로봇시스템학회 국제학술대회 논문집
2018 .10
-
Pareto RBF network ensemble using multi-objective evolutionary computation
제어로봇시스템학회 국제학술대회 논문집
2005 .06
-
A Robust and Computationally Efficient Optimal Design Algorithm of Electromagnetic Devices Using Adaptive Response Surface Method
Journal of Electrical Engineering & Technology
2008 .06
-
Multi-objective optimal design of laminate composite shells and stiffened shells
Structural engineering and mechanics : An international journal
2012 .01
-
파레토 인공생명 최적화 알고리듬의 제안
대한기계학회 논문집 A권
2006 .11
-
PSP를 이용한 15° 반와류 홀과 30-7-7 팬형상 홀의 막냉각 효율 비교 연구
한국유체기계학회 논문집
2016 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-554-001908861