메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
류지애 (경북대학교) 김강재 (경북대학교) 나기백 (경북대학교) 엄태진 (경북대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제50권 제3호(통권 제182호)
발행연도
2018.6
수록면
44 - 52 (9page)
DOI
10.7584/JKTAPPI.2018.06.50.3.44

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The MFC-PCC hybrid was prepared by physical pre-treatment of MFC and PCC. physical pre-treatment refers to the state where MFC and PCC were homogenized. In this study, it was called MFC-PCC Hybrid. When the MFC-PCC hybrid was applied, not only the tensile strength and ash content of handsheets were high, but also the pore size decreased. Also, as the homogenization rate of MFC and PCC increased, tensile index and pore size of handsheets were decreased and then increased again. As a result of investigation the coagulation behavior of the MFC-PCC hybrid, the zeta potential decreased with increasing homogenization rate, and it was found that the MFC and PCC behaved in the order of coagulation-dispersion-coagulation. These results showed that electrostatic bonding between two factors was not always achieved through homogenization of MFC and PCC, and it was expected that the cohesion of several cases may affect the properties of handsheets. In this regard, future research will attempt to prepare the MFC-PCC hybrid by controlling the time.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-586-003167999