메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김내현 (인천대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제30권 제8호
발행연도
2018.8
수록면
347 - 357 (11page)
DOI
10.6110/KJACR.2018.30.8.347

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Compared to the solid-desiccant system using rotors, the liquid-desiccant system has many advantages. including low regeneration temperature and removal of VOC, bacteria, and particulate matter. One deficiency of the liquid system, however, is the carryover of liquid desiccant into the system. In this study, a parallel-channel type of dehumidifying element made of cellulose/PET was developed; it minimized the liquid carryover even at relatively high velocities. Dehumidification tests were conducted using LiCl to change the frontal velocity from 2.0 to 4.0 m/s, and the results were compared with those obtained from commercial Celdek. Virtually no carryover was observed for the new sample up to 4.0 m/s, whereas the carryover was observed above 3.0 m/s for Celdek. The amount of dehumidification increased as frontal velocity increased. At 2.0 m/s, the amounts of dehumidification between the new sample and Celdek were approximately equal. At 4.0 m/s, however, Celdek yielded 16% more dehumidification. Celdek also yielded 41 to 48 percent larger pressure drops. Comparison of data from both the new sample and the Celdek with theoretical predictions or those from correlations showed significant disagreement, apparently because of the poor wetting of the liquid over sample surfaces, or deficiency of the correlations that resulted from ignoring the existence of liquid film.

목차

Abstract
1. 서론
2. 실험 장치 및 방법
3. 열 및 수분 전달 해석
4. 평행 채널의 수분 전달 해석
5. 결과 및 고찰
6. 결론
References

참고문헌 (34)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-553-003351465