메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김동선 (한국교통대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제30권 제12호
발행연도
2018.12
수록면
593 - 608 (16page)
DOI
10.6110/KJACR.2018.30.12.593

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Adsorption refrigeration technology has been attracting much interest as a promising alternative to conventional refrigeration technology thanks to its environmentally-friendly characteristics allowing for use of natural refrigerants and low-temperature heat sources. However, small specific cooling power and low energy efficiency remain for improvement. Recently, coated type absorbers are increasingly investigated as an alternative solution to the problem. In this study, test results for a few hygroscopic polymer-coated heat exchangers are analyzed with an analytical model and results are discussed. It is found that lithium acrylate adsorbent is superior to sodium acrylate adsorbent giving more than twice larger adsorption capacity and mass diffusion coefficients. It is predicted that performance of the adsorber can be significantly improved by increasing area density of the heat exchanger. It is also predicted that the heat exchanger’s reduced porosity would not increase vapor-side pressure drop so much as to counteract improved performance.

목차

Abstract
1. 서론
2. 흡착식 냉동사이클
3. 흡착식 냉동기의 성능
4. 결론
References

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-553-000185447