메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김동규 (울산대학교) 우완측 (한국원자력연구원)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第36卷 第6號
발행연도
2018.12
수록면
14 - 20 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Recently metal 3D printing technology has been considered as one of the most innovative manufacturing technology due to its various advantages. In particular, there have been urgent needs for technology using high melting point metal (HMPM) for the extreme environmental applications such as defense weapon, aerospace rocket, power plant. In this study, we conducted feasibility test for fabrication of Mo and W alloys using direct energy deposition (DED), which is one of the major additive manufacturing (AM) technologies. It is of great concern that the as-processed HMPMs are expected to have significant residual stress due to the use of high laser power in the 3D printing process. So we measured the residual stress and microstructure of Mo and W alloys processed by DED using non-destructive neutron diffraction method. The result demonstrated that the residual stress in the as-processed HMPMs is not significant raging form -100 to 200 MPa regardless of the high applied heat input due to the low thermal expansion and stress relief caused by intergranular micro-cracking.

목차

Abstract
1. 서론
2. 고융점 금속 3D프린팅 시험편의 제작
3. 비파괴 중성자회절 잔류응력 측정
4. 실험 결과 및 고찰
5. 결론
References

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0