메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김종도 (한국해양대학교) 박수한 (한국해양대학교) 송무근 (한국해양대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第36卷 第6號
발행연도
2018.12
수록면
34 - 39 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Cladding is an alloy layer that is superior in abrasion resistance by spraying, overlay welding, laser cladding or the like on its surface in case of abrasion due to repeated abrasion, impact, corrosion. Laser cladding is a process in which a clad material and a part of a substrate are melted with a high power laser beam to form a coating layer completely metallurgically bonded to the substrate. In this study, laser cladding was performed using Co-based LC-190 alloy powder for hard facing of ship exhaust valve. One-pass cladding was performed by varying the preheating temperature, laser output and beam feed rate of the base material using a diode laser with a maximum output power of 8.0 kW. The shape, dilution rate, Characteristics were observed. As a result, defects could be suppressed by applying preheating, and as the heat input increased, the width of the clad layer increased and the height decreased. In addition, the average hardness value was gradually decreased as a result of hardness measurement, and it was found that dilution was increased by EDS component analysis.

목차

Abstract
1. 서론
2. 실험 재료 및 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0